[PATCH] usb: dwc3: meson-g12a: fix refcount leak in dwc3_meson_g12a_resume()

WenTao Liang vulab at iscas.ac.cn
Thu Jun 11 06:11:21 PDT 2026


If dwc3_meson_g12a_resume() succeeds in calling
reset_control_reset(), an internal triggered_count reference is
acquired. If any later step fails (usb_init, phy_init,
phy_power_on, regulator_enable, or usb_post_init), the function
returns the error without rearming the reset control. This leaks
the reference and leaves the reset control in a triggered state,
causing future reset_control_reset() calls to incorrectly return
early as if already reset.

Add an error path that calls reset_control_rearm() to balance
the reference before returning the error.

Cc: stable at vger.kernel.org
Fixes: 5b0ba0caaf3a ("usb: dwc3: meson-g12a: refactor usb init")
Signed-off-by: WenTao Liang <vulab at iscas.ac.cn>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 55e144ba8cfc..4d611c08e8a4 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -907,35 +907,39 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
 
 	ret = priv->drvdata->usb_init(priv);
 	if (ret)
-		return ret;
+		goto err_rearm;
 
 	/* Init PHYs */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			return ret;
+			goto err_rearm;
 	}
 
 	/* Set PHY Power */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_power_on(priv->phys[i]);
 		if (ret)
-			return ret;
+			goto err_rearm;
 	}
 
 	if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
 		ret = regulator_enable(priv->vbus);
 		if (ret)
-			return ret;
+			goto err_rearm;
 	}
 
 	if (priv->drvdata->usb_post_init) {
 		ret = priv->drvdata->usb_post_init(priv);
 		if (ret)
-			return ret;
+			goto err_rearm;
 	}
 
 	return 0;
+
+err_rearm:
+	reset_control_rearm(priv->reset);
+	return ret;
 }
 
 static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
-- 
2.50.1 (Apple Git-155)




More information about the linux-arm-kernel mailing list