[PATCH v5 00/10] add mcf54415 DAC driver

[Greg Ungerer]

Hi Angelo,

On 11/6/26 06:35, Angelo Dureghello wrote:
> This patchset adds a minimalistic DAC driver for the NXP mcf54415/6/7/8
> builtin DACs.
> 
> Currently the driver enables the raw write only. Feature as dma, sync, or
> format are not supoprted for this version.
> 
> Additional options suppoerted by the DAC module will be added to the driver
> later on, as needed.
> 
> The same patchset prepares the m68k/coldfire architecture to support
> the driver.
> 
> Below some basic tests done on stmark2 mcf54415-based board, voltage check
> on DAC0 and DAC1:
> 
> ~ # cd /sys/bus/iio/devices/iio:device0/
> /sys/bus/iio/devices/iio:device0 # ls
> name               out_voltage_scale  uevent
> out_voltage_raw    subsystem
> /sys/bus/iio/devices/iio:device0 # cat name
> mcf54415
> /sys/bus/iio/devices/iio:device0 # echo 4095 > out_voltage_raw
> /sys/bus/iio/devices/iio:device0 # echo 2048 > out_voltage_raw
> /sys/bus/iio/devices/iio:device0 # echo 4096 > out_voltage_raw
> sh: write error: Invalid argument
> /sys/bus/iio/devices/iio:device0 # cat out_voltage_raw
> 2048
> /sys/bus/iio/devices/iio:device0 #
> 
> Same behavior for /sys/bus/iio/devices/iio:device1.
> 
> Generated a sine wave by shell script, sine shape is good.
> 
> is actually in progress:
> 
> Note: this patchset depends on mew mcf_read/mcf_write implementation that
> Link: https://lore.kernel.org/linux-m68k/209d0653-6386-4b64-9e15-e358f84453ab@app.fastmail.com/T/#t
> Link: https://lore.kernel.org/linux-m68k/20260506142644.3234270-2-gerg@kernel.org/
> ---
> Changes in v5:
> - keeping changelog in each single patch, where any
> - Link to v4: https://patch.msgid.link/20260531-wip-stmark2-dac-v4-0-7e65ab4215dd@baylibre.com
> 
> Changes in v4:
> - keeping changelog in each single patch, where any
> - Link to v3: https://patch.msgid.link/20260522-wip-stmark2-dac-v3-0-16be0ad35a67@baylibre.com
> 
> Changes in v3:
> - keeping changelog in each single patch, where any
> - Link to v2: https://patch.msgid.link/20260513-wip-stmark2-dac-v2-0-fcdae50cf51a@baylibre.com
> 
> Changes in v2:
> - keeping changelog in each single patch, where any
> - Link to v1: https://patch.msgid.link/20260504-wip-stmark2-dac-v1-0-874c36a4910d@baylibre.com
> 
> To: Greg Ungerer <gerg at linux-m68k.org>
> To: Geert Uytterhoeven <geert at linux-m68k.org>
> To: Steven King <sfking at fdwdc.com>
> To: Arnd Bergmann <arnd at arndb.de>
> To: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> To: Alexandre Torgue <alexandre.torgue at foss.st.com>
> To: Jonathan Cameron <jic23 at kernel.org>
> To: David Lechner <dlechner at baylibre.com>
> To: Nuno Sá <nuno.sa at analog.com>
> To: Andy Shevchenko <andy at kernel.org>
> Cc: Greg Ungerer <gerg at uclinux.org>
> Cc: linux-m68k at lists.linux-m68k.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-iio at vger.kernel.org
> 
> ---
> Angelo Dureghello (10):
>        m68k: mcf5441x: fix clocks numbering
>        m68k: mcf5441x: add clock for DAC channel 1
>        m68k: add DAC modules base addresses
>        m68k: mcf5441x: add CCM registers
>        m68k: mcf5441x: add CCR MISCCR2 bitfields
>        m68k: stmark2: use ioport.h macros for resources
>        m68k: stmark2: add mcf5441x DAC platform devices
>        m68k: stmark2: enable DACs outputs
>        iio: dac: add mcf54415 DAC
>        m68k: defconfig: update stmark2 defconfig
> 
>   arch/m68k/coldfire/m5441x.c         |  21 ++--
>   arch/m68k/coldfire/stmark2.c        |  47 +++++---
>   arch/m68k/configs/stmark2_defconfig |   2 +
>   arch/m68k/include/asm/m5441xsim.h   |  42 +++++++
>   drivers/iio/dac/Kconfig             |  11 ++
>   drivers/iio/dac/Makefile            |   1 +
>   drivers/iio/dac/mcf54415_dac.c      | 216 ++++++++++++++++++++++++++++++++++++
>   7 files changed, 316 insertions(+), 24 deletions(-)
> ---
> base-commit: dcf93520157c17ddfb1f43b66fcdda27714ff1dd
> change-id: 20260430-wip-stmark2-dac-7060f49dd94f

I am happy with patches 1 through 8, I think they are ready.
I have pushed them into the for-next branch of the m68knommu git tree.

When the driver proper (patch 9) ends in up in mainline then I will
push the defconfig update (patch 10).

Thanks
Greg