[PATCH V3 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

[Manivannan Sadhasivam]

On Thu, May 21, 2026 at 04:40:35AM +0000, Sherry Sun wrote:
> 
> > > -----Original Message-----
> > > From: Sherry Sun (OSS) <sherry.sun at oss.nxp.com>
> > > Sent: Wednesday, May 20, 2026 4:49 PM
> > > To: robh at kernel.org; krzk+dt at kernel.org; conor+dt at kernel.org; Frank Li
> > > <frank.li at nxp.com>; s.hauer at pengutronix.de; kernel at pengutronix.de;
> > > festevam at gmail.com; lpieralisi at kernel.org; kwilczynski at kernel.org;
> > > mani at kernel.org; bhelgaas at google.com; Hongxing Zhu
> > > <hongxing.zhu at nxp.com>; l.stach at pengutronix.de
> > > Cc: imx at lists.linux.dev; linux-pci at vger.kernel.org; linux-arm-
> > > kernel at lists.infradead.org; devicetree at vger.kernel.org; linux-
> > > kernel at vger.kernel.org; Sherry Sun <sherry.sun at nxp.com>
> > > Subject: [PATCH V3 0/8] PCI: imx6: Integrate pwrctrl API and update
> > > device trees
> > >
> > > From: Sherry Sun <sherry.sun at nxp.com>
> > >
> > > This series integrates the PCI pwrctrl framework into the pci-imx6
> > > driver and updates i.MX EVK board device trees to support it.
> > >
> > > Patches 2-8 update device trees for i.MX EVK boards which maintained
> > > by NXP to move power supply properties from the PCIe controller node
> > > to the Root Port child node, which is required for pwrctrl framework.
> > > Affected boards:
> > > - i.MX6Q/DL SABRESD
> > > - i.MX6SX SDB
> > > - i.MX8MM EVK
> > > - i.MX8MP EVK
> > > - i.MX8MQ EVK
> > > - i.MX8DXL/QM/QXP EVK
> > > - i.MX95 15x15/19x19 EVK
> > >
> > > The driver maintains legacy regulator handling for device trees that
> > > haven't been updated yet. Both old and new device tree structures are
> > supported.
> > >
> > > Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
> > Hi Sherry:
> > Since the vpcie3v3aux is used to power up the WAKE#, it is always on in this
> > pwrctrl framework whatever the system is in suspend or not, right?
> > 
> 
> Hi Richard,
> Currently the new pwrctrl framework doesn't support vpcie3v3aux, it handles all
> regulators with of_regulator_bulk_get_all() and regulator_bulk_enable/disable().
> The vpcie3v3aux now only works with pci-imx6 driver.
> 

PWRCTRL_GENERIC driver can handle both vpcie3v3 and vpcie3v3aux, but not
POWER_SEQUENCING_PCIE_M2 driver, as there is no 3.3Vaux defined in M.2 spec.

- Mani

-- 
மணிவண்ணன் சதாசிவம்