[PATCH v2 06/16] usb: hub: Pass |struct usb_port*| to usb_port_is_power_on()
Chen-Yu Tsai
wenst at chromium.org
Wed Jun 10 01:40:40 PDT 2026
usb_port_is_power_on() currently takes |struct usb_hub*|, but only needs
it to tell if the hub/port is SuperSpeed or not.
In a subsequent change, usb_port_is_power_on() needs access to a pwrseq
state tracking field in |struct usb_port|. Either structure can be used
to identify whether a port/hub is SuperSpeed or not, as the field in
|struct usb_port| is inherited from the hub:
port->is_superspeed = hub_is_superspeed(hub)
Replace usb_port_is_power_on()'s |struct usb_hub*| parameter with
|struct usb_port*| so a subsequent change can use it.
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
drivers/usb/core/hub.c | 11 ++++++-----
drivers/usb/core/hub.h | 2 +-
drivers/usb/core/port.c | 2 +-
3 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 985551d013b2..362a10f7eddb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3240,11 +3240,11 @@ static bool hub_port_stop_enumerate(struct usb_hub *hub, int port1, int retries)
}
/* Check if a port is power on */
-int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
+int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus)
{
int ret = 0;
- if (hub_is_superspeed(hub->hdev)) {
+ if (port->is_superspeed) {
if (portstatus & USB_SS_PORT_STAT_POWER)
ret = 1;
} else {
@@ -3306,7 +3306,7 @@ static int check_port_resume_type(struct usb_device *udev,
}
/* Is the device still present? */
else if (status || port_is_suspended(hub, portstatus) ||
- !usb_port_is_power_on(hub, portstatus)) {
+ !usb_port_is_power_on(port_dev, portstatus)) {
if (status >= 0)
status = -ENODEV;
} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
@@ -3748,12 +3748,13 @@ static int wait_for_connected(struct usb_device *udev,
struct usb_hub *hub, int port1,
u16 *portchange, u16 *portstatus)
{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
int status = 0, delay_ms = 0;
while (delay_ms < 2000) {
if (status || *portstatus & USB_PORT_STAT_CONNECTION)
break;
- if (!usb_port_is_power_on(hub, *portstatus)) {
+ if (!usb_port_is_power_on(port_dev, *portstatus)) {
status = -ENODEV;
break;
}
@@ -5449,7 +5450,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
* but only if the port isn't owned by someone else.
*/
if (hub_is_port_power_switchable(hub)
- && !usb_port_is_power_on(hub, portstatus)
+ && !usb_port_is_power_on(port_dev, portstatus)
&& !port_dev->port_owner)
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 9ebc5ef54a32..b65d9192379d 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -138,7 +138,7 @@ extern int usb_clear_port_feature(struct usb_device *hdev,
int port1, int feature);
extern int usb_hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change);
-extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus);
+extern int usb_port_is_power_on(struct usb_port *port, unsigned int portstatus);
static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
{
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 1846eb1206a4..d9d3e2bb8f25 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -97,7 +97,7 @@ static ssize_t disable_show(struct device *dev,
}
usb_hub_port_status(hub, port1, &portstatus, &unused);
- disabled = !usb_port_is_power_on(hub, portstatus);
+ disabled = !usb_port_is_power_on(port_dev, portstatus);
out_hdev_lock:
usb_unlock_device(hdev);
--
2.54.0.1099.g489fc7bff1-goog
More information about the linux-arm-kernel
mailing list