[PATCH v4 3/3] arm64: dts: nuvoton: Add I2C nodes for MA35D1 SoC

[Zi-Yu Chen]

Add I2C controller nodes to the MA35D1 SoC dtsi file.
Also, enable the I2C2 interface on the MA35D1 SOM board and
configure its pinctrl to allow communication with the onboard
NAU8822 audio codec

Signed-off-by: Zi-Yu Chen <zychennvt at gmail.com>
---
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 20 ++++++
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 72 +++++++++++++++++++
 2 files changed, 92 insertions(+)

diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..4b9ff6d00631 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -55,6 +55,18 @@ &clk {
 			   "integer";
 };
 
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+
+	nau8822: nau8822 at 1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a> ;
+		nuvoton,spk-btl;
+	};
+};
+
 &pinctrl {
 	uart-grp {
 		pinctrl_uart0: uart0-pins {
@@ -98,6 +110,14 @@ pinctrl_uart16: uart16-pins {
 			power-source = <1>;
 		};
 	};
+
+	i2c-grp {
+		pinctrl_i2c2: i2c2-pins {
+			nuvoton,pins = <1 8 4>,
+				       <1 9 4>;
+			bias-disable;
+		};
+	};
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..fe9e0895beb4 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -372,6 +372,78 @@ uart15: serial at 407f0000 {
 			status = "disabled";
 		};
 
+		i2c0: i2c at 40800000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40800000 0x0 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C0_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c at 40810000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40810000 0x0 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C1_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c at 40820000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40820000 0x0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C2_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c at 40830000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40830000 0x0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C3_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c at 40840000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40840000 0x0 0x1000>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C4_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5: i2c at 40850000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40850000 0x0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C5_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C5>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart16: serial at 40880000 {
 			compatible = "nuvoton,ma35d1-uart";
 			reg = <0x0 0x40880000 0x0 0x100>;
-- 
2.34.1