[PATCH v6 11/11] arm64: dts: ti: k3-am62p-ti-ipc-firmware: Add r5f nodes to pre-ram bootphase

[Markus Schneider-Pargmann (TI)]

For IO+DDR the wkup_r5fss0_core0 and the
wkup_r5fss0_core0_lpm_metadata_region need to be accessed before RAM
setup is done. These are used to read the lpm metadata region in which
data is stored to resume. This needs to be done before RAM is in use to
avoid overwriting data.

Signed-off-by: Markus Schneider-Pargmann (TI) <msp at baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
index 8f7409da83392d2d1f160a9645ef4d68f7aaa1bf..04fcd5115b9d95e6e23c4e43782c06501a0fa601 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
@@ -40,6 +40,7 @@ wkup_r5fss0_core0_lpm_metadata_region: memory at 9ca08000 {
 		compatible = "shared-dma-pool";
 		reg = <0x00 0x9ca08000 0x00 0x1000>;
 		no-map;
+		bootph-pre-ram;
 	};
 
 	wkup_r5fss0_core0_lpm_rest_region: memory at 9ca09000 {
@@ -89,6 +90,7 @@ &wkup_r5fss0_core0 {
 			      "lpm-metadata", "lpm-context",
 			      "dm-firmware";
 	status = "okay";
+	bootph-pre-ram;
 };
 
 &mcu_r5fss0 {

-- 
2.53.0