[PATCH v6 01/11] arm64: dts: ti: k3-am62a-phycore-som: Fix wkup R5F memory region size

[Markus Schneider-Pargmann (TI)]

The wkup_r5fss0_core0_memory_region was reserved with only
0x0f00000 but the MCU SDK linker for the wkup R5F firmware on
AM62A defines the DM code/data DDR footprint differently:

    /* DDR for DM R5F code/data [ size 27 MiB + 364 KB ] */
    DDR                         : ORIGIN = 0x9CAA5000 LENGTH = 0x1B5B000

which results in an end at 0x9e600000. For this memory region which
starts at 0x9c900000 this means a length of:

    0x9e600000 - 0x9c900000 = 0x1d00000

Link: https://github.com/TexasInstruments/mcupsdk-core-k3/blob/k3_main/examples/drivers/ipc/ipc_rpmsg_echo_linux/am62ax-sk/r5fss0-0_freertos/ti-arm-clang/linker.cmd
Fixes: 8dd0ac27fcd1 ("arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors")
Signed-off-by: Markus Schneider-Pargmann (TI) <msp at baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index de4048a3564bcac9558f88c94381f07db30d4f99..e13da7c95a30459e7649f284689039b89a95f651 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -67,7 +67,7 @@ wkup_r5fss0_core0_dma_memory_region: memory at 9c800000 {
 
 		wkup_r5fss0_core0_memory_region: memory at 9c900000 {
 			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			reg = <0x00 0x9c900000 0x00 0x01d00000>;
 			no-map;
 		};
 

-- 
2.53.0