[PATCH v2 3/7] clk: qcom: Make important ARM64 drivers default
Krzysztof Kozlowski
krzysztof.kozlowski at oss.qualcomm.com
Tue Jun 9 08:32:37 PDT 2026
Clock controller drivers are essential for booting up SoCs and are not
really optional for a given platform. Kernel should not ask users
choice of drivers when that choice is obvious and known to the
developers that answer should be 'yes' or 'module'.
Switch all Qualcomm clock controller drivers which are chosen in
defconfig to respective default 'yes' or 'module'.
This has no impact on ARM64 defconfig include/generated/autoconf.h,
however changes few drivers for ARM 32-bit:
1. multi_v7_defconfig: Enable QCOM_CLK_RPMH as module, because SDX55
(ARM 32-bit) uses it.
2. qcom_defconfig: Enable QCOM_A53PLL, QCOM_CLK_APCS_MSM8916 and
MSM_GCC_8916 as built-in, because MSM8916 is also used ARM 32-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
---
Changes in v2:
1. Add defaults for msm8994-8996-8998.
2. Move defconfig change to separate commit.
3. Drop Rb tag becauase of above.
---
drivers/clk/qcom/Kconfig | 122 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 3b8768d80d89..d8281ed68dc5 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -23,6 +23,7 @@ config CLK_ELIZA_DISPCC
tristate "Eliza Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_ELIZA_GCC
+ default m if ARCH_QCOM
help
Support for the display clock controllers on Eliza SoCs.
Say Y if you want to support display devices and functionality such as
@@ -32,6 +33,7 @@ config CLK_ELIZA_GCC
tristate "Eliza Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on Eliza devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -41,6 +43,7 @@ config CLK_ELIZA_TCSRCC
tristate "Eliza TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the TCSR clock controller on Eliza devices.
Say Y if you want to use peripheral devices such as USB/PCIe/UFS.
@@ -49,6 +52,7 @@ config CLK_GLYMUR_DISPCC
tristate "Glymur Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_GLYMUR_GCC
+ default m if ARCH_QCOM
help
Support for the display clock controllers on Qualcomm
Technologies, Inc. Glymur devices.
@@ -59,6 +63,7 @@ config CLK_GLYMUR_GCC
tristate "Glymur Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on Glymur devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -77,6 +82,7 @@ config CLK_GLYMUR_TCSRCC
tristate "Glymur TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the TCSR clock controller on Glymur devices.
Say Y if you want to use peripheral devices such as USB/PCIe/EDP.
@@ -94,6 +100,7 @@ config CLK_KAANAPALI_CAMCC
tristate "Kaanapali Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_KAANAPALI_GCC
+ default m if ARCH_QCOM
help
Support for the camera clock controller on Qualcomm Technologies, Inc
Kaanapali devices.
@@ -104,6 +111,7 @@ config CLK_KAANAPALI_DISPCC
tristate "Kaanapali Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_KAANAPALI_GCC
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
Kaanapali devices.
@@ -114,6 +122,7 @@ config CLK_KAANAPALI_GCC
tristate "Kaanapali Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on Kaanapali devices.
Say Y if you want to use peripheral devices such as UART,
@@ -123,6 +132,7 @@ config CLK_KAANAPALI_GPUCC
tristate "Kaanapali Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_KAANAPALI_GCC
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on Kaanapali devices.
Say Y if you want to support graphics controller devices and
@@ -132,6 +142,7 @@ config CLK_KAANAPALI_TCSRCC
tristate "Kaanapali TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the TCSR clock controller on Kaanapali devices.
Say Y if you want to use peripheral devices such as PCIe, USB, UFS.
@@ -140,6 +151,7 @@ config CLK_KAANAPALI_VIDEOCC
tristate "Kaanapali Video Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_KAANAPALI_GCC
+ default m if ARCH_QCOM
help
Support for the video clock controller on Kaanapali devices.
Say Y if you want to support video devices and functionality such as
@@ -159,6 +171,7 @@ config CLK_X1E80100_CAMCC
tristate "X1E80100 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_X1E80100_GCC
+ default m if ARCH_QCOM
help
Support for the camera clock controller on X1E80100 devices.
Say Y if you want to support camera devices and camera functionality.
@@ -167,6 +180,7 @@ config CLK_X1E80100_DISPCC
tristate "X1E80100 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_X1E80100_GCC
+ default m if ARCH_QCOM
help
Support for the two display clock controllers on Qualcomm
Technologies, Inc. X1E80100 devices.
@@ -177,6 +191,7 @@ config CLK_X1E80100_GCC
tristate "X1E80100 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on Qualcomm Technologies, Inc
X1E80100 devices.
@@ -187,6 +202,7 @@ config CLK_X1E80100_GPUCC
tristate "X1E80100 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_X1E80100_GCC
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on X1E80100 devices.
Say Y if you want to support graphics controller devices and
@@ -196,6 +212,7 @@ config CLK_X1E80100_TCSRCC
tristate "X1E80100 TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the TCSR clock controller on X1E80100 devices.
Say Y if you want to use peripheral devices such as SD/UFS.
@@ -204,6 +221,7 @@ config CLK_X1P42100_GPUCC
tristate "X1P42100 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select CLK_X1E80100_GCC
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on X1P42100 devices.
Say Y if you want to support graphics controller devices and
@@ -213,6 +231,7 @@ config CLK_QCM2290_GPUCC
tristate "QCM2290 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCM_GCC_2290
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on QCM2290 devices.
Say Y if you want to support graphics controller devices and
@@ -220,6 +239,7 @@ config CLK_QCM2290_GPUCC
config QCOM_A53PLL
tristate "MSM8916 A53 PLL"
+ default ARCH_QCOM
help
Support for the A53 PLL on MSM8916 devices. It provides
the CPU with frequencies above 1GHz.
@@ -238,6 +258,7 @@ config QCOM_A7PLL
config QCOM_CLK_APCS_MSM8916
tristate "MSM8916 APCS Clock Controller"
depends on QCOM_APCS_IPC || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the APCS Clock Controller on msm8916 devices. The
APCS is managing the mux and divider which feeds the CPUs.
@@ -249,6 +270,7 @@ config QCOM_CLK_APCC_MSM8996
select QCOM_KRYO_L2_ACCESSORS
select INTERCONNECT_CLK if INTERCONNECT
depends on ARM64
+ default ARCH_QCOM
help
Support for the CPU clock controller on msm8996 devices.
Say Y if you want to support CPU clock scaling using CPUfreq
@@ -279,6 +301,7 @@ config QCOM_CLK_RPM
config QCOM_CLK_SMD_RPM
tristate "RPM over SMD based Clock Controller"
depends on QCOM_SMD_RPM
+ default ARCH_QCOM
help
The RPM (Resource Power Manager) is a dedicated hardware engine for
managing the shared SoC resources in order to keep the lowest power
@@ -291,6 +314,7 @@ config QCOM_CLK_SMD_RPM
config QCOM_CLK_RPMH
tristate "RPMh Clock Driver"
depends on QCOM_RPMH
+ default ARCH_QCOM
help
RPMh manages shared resources on some Qualcomm Technologies, Inc.
SoCs. It accepts requests from other hardware subsystems via RSC.
@@ -356,6 +380,7 @@ config IPQ_APSS_6018
depends on ARM64 || COMPILE_TEST
depends on QCOM_APCS_IPC || COMPILE_TEST
depends on QCOM_SMEM
+ default ARCH_QCOM
help
Support for APSS clock controller on IPQ platforms. The
APSS clock controller manages the Mux and enable block that feeds the
@@ -366,6 +391,7 @@ config IPQ_APSS_6018
config IPQ_CMN_PLL
tristate "IPQ CMN PLL Clock Controller"
depends on ARM64 || COMPILE_TEST
+ default m if ARCH_QCOM
help
Support for CMN PLL clock controller on IPQ platform. The
CMN PLL consumes the AHB/SYS clocks from GCC and supplies
@@ -384,6 +410,7 @@ config IPQ_GCC_4019
config IPQ_GCC_5018
tristate "IPQ5018 Global Clock Controller"
depends on ARM || ARM64 || COMPILE_TEST
+ default ARCH_QCOM && ARM64
help
Support for global clock controller on ipq5018 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -392,6 +419,7 @@ config IPQ_GCC_5018
config IPQ_GCC_5210
tristate "IPQ5210 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on ipq5210 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -400,6 +428,7 @@ config IPQ_GCC_5210
config IPQ_GCC_5332
tristate "IPQ5332 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on ipq5332 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -408,6 +437,7 @@ config IPQ_GCC_5332
config IPQ_GCC_5424
tristate "IPQ5424 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on ipq5424 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -416,6 +446,7 @@ config IPQ_GCC_5424
config IPQ_GCC_6018
tristate "IPQ6018 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for global clock controller on ipq6018 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -443,6 +474,7 @@ config IPQ_GCC_8074
tristate "IPQ8074 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for global clock controller on ipq8074 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -452,6 +484,7 @@ config IPQ_GCC_8074
config IPQ_GCC_9574
tristate "IPQ9574 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for global clock controller on ipq9574 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -472,6 +505,7 @@ config IPQ_NSSCC_5424
tristate "IPQ5424 NSS Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on IPQ_GCC_5424
+ default m if ARCH_QCOM
help
Support for NSS clock controller on ipq5424 devices.
NSSCC receives the clock sources from GCC, CMN PLL and UNIPHY (PCS).
@@ -483,6 +517,7 @@ config IPQ_NSSCC_9574
tristate "IPQ9574 NSS Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on IPQ_GCC_9574
+ default m if ARCH_QCOM
help
Support for NSS clock controller on ipq9574 devices.
@@ -515,6 +550,7 @@ config MSM_GCC_8909
config MSM_GCC_8916
tristate "MSM8916 Global Clock Controller"
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on msm8916 devices.
Say Y if you want to use devices such as UART, SPI i2c, USB,
@@ -583,6 +619,7 @@ config MSM_MMCC_8960
config MSM_GCC_8953
tristate "MSM8953 Global Clock Controller"
select QCOM_GDSC
+ default ARCH_QCOM if ARM64
help
Support for the global clock controller on msm8953 devices.
Say Y if you want to use devices such as UART, SPI i2c, USB,
@@ -619,6 +656,7 @@ config MSM_MMCC_8994
tristate "MSM8994 Multimedia Clock Controller"
select MSM_GCC_8994
select QCOM_GDSC
+ default m if ARCH_QCOM && ARM64
help
Support for the multimedia clock controller on msm8994 devices.
Say Y if you want to support multimedia devices such as display,
@@ -626,6 +664,7 @@ config MSM_MMCC_8994
config MSM_GCC_8994
tristate "MSM8994 Global Clock Controller"
+ default ARCH_QCOM if ARM64
help
Support for the global clock controller on msm8994 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -634,6 +673,7 @@ config MSM_GCC_8994
config MSM_GCC_8996
tristate "MSM8996 Global Clock Controller"
select QCOM_GDSC
+ default ARCH_QCOM if ARM64
help
Support for the global clock controller on msm8996 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -643,6 +683,7 @@ config MSM_MMCC_8996
tristate "MSM8996 Multimedia Clock Controller"
select MSM_GCC_8996
select QCOM_GDSC
+ default m if ARCH_QCOM && ARM64
help
Support for the multimedia clock controller on msm8996 devices.
Say Y if you want to support multimedia devices such as display,
@@ -651,6 +692,7 @@ config MSM_MMCC_8996
config MSM_GCC_8998
tristate "MSM8998 Global Clock Controller"
select QCOM_GDSC
+ default ARCH_QCOM if ARM64
help
Support for the global clock controller on msm8998 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -669,6 +711,7 @@ config MSM_MMCC_8998
tristate "MSM8998 Multimedia Clock Controller"
select MSM_GCC_8998
select QCOM_GDSC
+ default m if ARCH_QCOM && ARM64
help
Support for the multimedia clock controller on msm8998 devices.
Say Y if you want to support multimedia devices such as display,
@@ -678,6 +721,7 @@ config QCM_GCC_2290
tristate "QCM2290 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on QCM2290 devices.
Say Y if you want to use multimedia devices or peripheral
@@ -687,6 +731,7 @@ config QCM_DISPCC_2290
tristate "QCM2290 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCM_GCC_2290
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
QCM2290 devices.
@@ -697,6 +742,7 @@ config QCS_DISPCC_615
tristate "QCS615 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCS_GCC_615
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
QCS615 devices.
@@ -707,6 +753,7 @@ config QCS_CAMCC_615
tristate "QCS615 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCS_GCC_615
+ default m if ARCH_QCOM
help
Support for the camera clock controller on Qualcomm Technologies, Inc
QCS615 devices.
@@ -715,6 +762,7 @@ config QCS_CAMCC_615
config QCS_GCC_404
tristate "QCS404 Global Clock Controller"
+ default y if ARCH_QCOM && ARM64
help
Support for the global clock controller on QCS404 devices.
Say Y if you want to use multimedia devices or peripheral
@@ -731,6 +779,7 @@ config SA_CAMCC_8775P
tristate "SA8775P Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SA_GCC_8775P
+ default m if ARCH_QCOM
help
Support for the camera clock controller on Qualcomm Technologies, Inc
SA8775P devices.
@@ -741,6 +790,7 @@ config QCS_GCC_8300
tristate "QCS8300 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on Qualcomm Technologies, Inc
QCS8300 devices.
@@ -751,6 +801,7 @@ config QCS_GCC_615
tristate "QCS615 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on QCS615 devices.
Say Y if you want to use multimedia devices or peripheral
@@ -760,6 +811,7 @@ config QCS_GPUCC_615
tristate "QCS615 Graphics clock controller"
depends on ARM64 || COMPILE_TEST
select QCS_GCC_615
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on QCS615 devices.
Say Y if you want to support graphics controller devices and
@@ -769,6 +821,7 @@ config QCS_VIDEOCC_615
tristate "QCS615 Video Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCS_GCC_615
+ default m if ARCH_QCOM
help
Support for the video clock controller on QCS615 devices.
Say Y if you want to support video devices and functionality such as
@@ -788,6 +841,7 @@ config SC_CAMCC_7280
tristate "SC7280 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_7280
+ default m if ARCH_QCOM
help
Support for the camera clock controller on Qualcomm Technologies, Inc
SC7280 devices.
@@ -808,6 +862,7 @@ config SC_CAMCC_8280XP
tristate "SC8280XP Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_8280XP
+ default m if ARCH_QCOM
help
Support for the camera clock controller on Qualcomm Technologies, Inc
SC8280XP devices.
@@ -818,6 +873,7 @@ config SA_DISPCC_8775P
tristate "SA8775P Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select SA_GCC_8775P
+ default m if ARCH_QCOM
help
Support for the two display clock controllers on Qualcomm
Technologies, Inc. SA8775P devices.
@@ -838,6 +894,7 @@ config SC_DISPCC_7280
tristate "SC7280 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_7280
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc.
SC7280 devices.
@@ -848,6 +905,7 @@ config SC_DISPCC_8280XP
tristate "SC8280XP Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_8280XP
+ default m if ARCH_QCOM
help
Support for the two display clock controllers on Qualcomm
Technologies, Inc. SC8280XP devices.
@@ -859,6 +917,7 @@ config SA_GCC_8775P
select QCOM_GDSC
depends on ARM64 || COMPILE_TEST
depends on COMMON_CLK_QCOM
+ default ARCH_QCOM
help
Support for the global clock controller on SA8775 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -869,6 +928,7 @@ config SA_GPUCC_8775P
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
select SA_GCC_8775P
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SA8775P devices.
Say Y if you want to support graphics controller devices and
@@ -897,6 +957,7 @@ config SC_GCC_7180
select QCOM_GDSC
depends on COMMON_CLK_QCOM
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on SC7180 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -907,6 +968,7 @@ config SC_GCC_7280
select QCOM_GDSC
depends on COMMON_CLK_QCOM
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on SC7280 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -917,6 +979,7 @@ config SC_GCC_8180X
select QCOM_GDSC
depends on COMMON_CLK_QCOM
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on SC8180X devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -927,6 +990,7 @@ config SC_GCC_8280XP
select QCOM_GDSC
depends on COMMON_CLK_QCOM
depends on ARM64 || COMPILE_TEST
+ default ARCH_QCOM
help
Support for the global clock controller on SC8280XP devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -945,6 +1009,7 @@ config SC_GPUCC_7280
tristate "SC7280 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_7280
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SC7280 devices.
Say Y if you want to support graphics controller devices and
@@ -954,6 +1019,7 @@ config SC_GPUCC_8280XP
tristate "SC8280XP Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_8280XP
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SC8280XP devices.
Say Y if you want to support graphics controller devices and
@@ -972,6 +1038,7 @@ config SC_LPASSCC_8280XP
tristate "SC8280 Low Power Audio Subsystem (LPASS) Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_8280XP
+ default m if ARCH_QCOM
help
Support for the LPASS clock controller on SC8280XP devices.
Say Y if you want to use the LPASS branch clocks of the LPASS clock
@@ -992,6 +1059,7 @@ config SC_LPASS_CORECC_7280
depends on ARM64 || COMPILE_TEST
select SC_GCC_7280
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the LPASS(Low Power Audio Subsystem) core and audio clock
controller on SC7280 devices.
@@ -1011,6 +1079,7 @@ config SC_VIDEOCC_7280
tristate "SC7280 Video Clock Controller"
depends on ARM64 || COMPILE_TEST
select SC_GCC_7280
+ default m if ARCH_QCOM
help
Support for the video clock controller on SC7280 devices.
Say Y if you want to support video devices and functionality such as
@@ -1020,6 +1089,7 @@ config SDM_CAMCC_845
tristate "SDM845 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SDM_GCC_845
+ default m if ARCH_QCOM
help
Support for the camera clock controller on SDM845 devices.
Say Y if you want to support camera devices and camera functionality.
@@ -1071,6 +1141,7 @@ config QDU_GCC_1000
tristate "QDU1000/QRU1000 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on QDU1000 and
QRU1000 devices. Say Y if you want to use peripheral
@@ -1089,6 +1160,7 @@ config SDM_GCC_845
tristate "SDM845/SDM670 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SDM845 and SDM670 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1098,6 +1170,7 @@ config SDM_GPUCC_845
tristate "SDM845 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SDM_GCC_845
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SDM845 devices.
Say Y if you want to support graphics controller devices and
@@ -1108,6 +1181,7 @@ config SDM_VIDEOCC_845
depends on ARM64 || COMPILE_TEST
select SDM_GCC_845
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on SDM845 devices.
Say Y if you want to support video devices and functionality such as
@@ -1117,6 +1191,7 @@ config SDM_DISPCC_845
tristate "SDM845 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
select SDM_GCC_845
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SDM845 devices.
@@ -1127,6 +1202,7 @@ config SDM_LPASSCC_845
tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller"
depends on ARM64 || COMPILE_TEST
select SDM_GCC_845
+ default m if ARCH_QCOM
help
Support for the LPASS clock controller on SDM845 devices.
Say Y if you want to use the LPASS branch clocks of the LPASS clock
@@ -1153,6 +1229,7 @@ config SDX_GCC_65
config SDX_GCC_75
tristate "SDX75 Global Clock Controller"
select QCOM_GDSC
+ default ARCH_QCOM if ARM64
help
Support for the global clock controller on SDX75 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1170,6 +1247,7 @@ config SM_CAMCC_6350
tristate "SM6350 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_6350
+ default m if ARCH_QCOM
help
Support for the camera clock controller on SM6350 devices.
Say Y if you want to support camera devices and camera functionality.
@@ -1186,6 +1264,7 @@ config SM_CAMCC_MILOS
tristate "Milos Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_MILOS
+ default m if ARCH_QCOM
help
Support for the camera clock controller on Milos devices.
Say Y if you want to support camera devices and camera functionality.
@@ -1204,6 +1283,7 @@ config SM_CAMCC_8250
tristate "SM8250 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8250
+ default m if ARCH_QCOM
help
Support for the camera clock controller on SM8250 devices.
Say Y if you want to support camera devices and camera functionality.
@@ -1220,6 +1300,7 @@ config SM_CAMCC_8550
tristate "SM8550 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8550
+ default m if ARCH_QCOM
help
Support for the camera clock controller on SM8550 devices.
Say Y if you want to support camera devices and camera functionality.
@@ -1228,6 +1309,7 @@ config SM_CAMCC_8650
tristate "SM8650 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8650
+ default m if ARCH_QCOM
help
Support for the camera clock controller on SM8650 devices.
Say Y if you want to support camera devices and camera functionality.
@@ -1236,6 +1318,7 @@ config SM_CAMCC_8750
tristate "SM8750 Camera Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8750
+ default m if ARCH_QCOM
help
Support for the camera clock controller on SM8750 devices.
The camera clock controller has a separate cambist controller which
@@ -1256,6 +1339,7 @@ config SM_DISPCC_6115
tristate "SM6115 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_6115
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SM6115/SM4250 devices.
@@ -1286,6 +1370,7 @@ config SM_DISPCC_8250
tristate "SM8150/SM8250/SM8350 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SM8150/SM8250/SM8350 devices.
@@ -1296,6 +1381,7 @@ config SM_DISPCC_6350
tristate "SM6350 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_6350
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SM6350 devices.
@@ -1316,6 +1402,7 @@ config SM_DISPCC_MILOS
tristate "Milos Display Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_MILOS
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
Milos devices.
@@ -1326,6 +1413,7 @@ config SM_DISPCC_8450
tristate "SM8450 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_8450
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SM8450 or SM8475 devices.
@@ -1336,6 +1424,7 @@ config SM_DISPCC_8550
tristate "SM8550 Display Clock Controller"
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_8550 || SM_GCC_8650 || SAR_GCC_2130P
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SAR2130P, SM8550 or SM8650 devices.
@@ -1347,6 +1436,7 @@ config SM_DISPCC_8750
depends on ARM64 || COMPILE_TEST
depends on SM_GCC_8750
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the display clock controller on Qualcomm Technologies, Inc
SM8750 devices.
@@ -1357,6 +1447,7 @@ config SM_GCC_4450
tristate "SM4450 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM4450 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1366,6 +1457,7 @@ config SM_GCC_6115
tristate "SM6115 and SM4250 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM6115 and SM4250 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1384,6 +1476,7 @@ config SM_GCC_6350
tristate "SM6350 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM6350 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1411,6 +1504,7 @@ config SM_GCC_MILOS
tristate "Milos Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on Milos devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1420,6 +1514,7 @@ config SM_GCC_8150
tristate "SM8150 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8150 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1429,6 +1524,7 @@ config SM_GCC_8250
tristate "SM8250 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8250 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1438,6 +1534,7 @@ config SM_GCC_8350
tristate "SM8350 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8350 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1447,6 +1544,7 @@ config SM_GCC_8450
tristate "SM8450 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8450 or SM8475
devices.
@@ -1457,6 +1555,7 @@ config SM_GCC_8550
tristate "SM8550 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8550 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1466,6 +1565,7 @@ config SM_GCC_8650
tristate "SM8650 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8650 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1475,6 +1575,7 @@ config SM_GCC_8750
tristate "SM8750 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the global clock controller on SM8750 devices.
Say Y if you want to use peripheral devices such as UART,
@@ -1493,6 +1594,7 @@ config SM_GPUCC_6115
tristate "SM6115 Graphics Clock Controller"
select SM_GCC_6115
depends on ARM64 || COMPILE_TEST
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM6115 devices.
Say Y if you want to support graphics controller devices and
@@ -1520,6 +1622,7 @@ config SM_GPUCC_6350
tristate "SM6350 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_6350
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM6350 devices.
Say Y if you want to support graphics controller devices and
@@ -1529,6 +1632,7 @@ config SM_GPUCC_MILOS
tristate "Milos Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_MILOS
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on Milos devices.
Say Y if you want to support graphics controller devices and
@@ -1538,6 +1642,7 @@ config SM_GPUCC_8150
tristate "SM8150 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8150
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8150 devices.
Say Y if you want to support graphics controller devices and
@@ -1547,6 +1652,7 @@ config SM_GPUCC_8250
tristate "SM8250 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8250
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8250 devices.
Say Y if you want to support graphics controller devices and
@@ -1556,6 +1662,7 @@ config SM_GPUCC_8350
tristate "SM8350 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8350
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8350 devices.
Say Y if you want to support graphics controller devices and
@@ -1565,6 +1672,7 @@ config SM_GPUCC_8450
tristate "SM8450 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8450
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8450 or SM8475
devices.
@@ -1575,6 +1683,7 @@ config SM_GPUCC_8550
tristate "SM8550 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8550
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8550 devices.
Say Y if you want to support graphics controller devices and
@@ -1584,6 +1693,7 @@ config SM_GPUCC_8650
tristate "SM8650 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8650
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8650 devices.
Say Y if you want to support graphics controller devices and
@@ -1593,6 +1703,7 @@ config SM_GPUCC_8750
tristate "SM8750 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
select SM_GCC_8750
+ default m if ARCH_QCOM
help
Support for the graphics clock controller on SM8750 devices.
Say Y if you want to support graphics controller devices and
@@ -1611,6 +1722,7 @@ config SM_TCSRCC_8550
tristate "SM8550 TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the TCSR clock controller on SM8550 devices.
Say Y if you want to use peripheral devices such as SD/UFS.
@@ -1619,6 +1731,7 @@ config SM_TCSRCC_8650
tristate "SM8650 TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default ARCH_QCOM
help
Support for the TCSR clock controller on SM8650 devices.
Say Y if you want to use peripheral devices such as SD/UFS.
@@ -1627,6 +1740,7 @@ config SM_TCSRCC_8750
tristate "SM8750 TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the TCSR clock controller on SM8750 devices.
Say Y if you want to use peripheral devices such as UFS/USB/PCIe.
@@ -1636,6 +1750,7 @@ config SA_VIDEOCC_8775P
depends on ARM64 || COMPILE_TEST
select SA_GCC_8775P
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on Qualcomm Technologies, Inc.
SA8775P devices.
@@ -1647,6 +1762,7 @@ config SM_VIDEOCC_6350
depends on ARM64 || COMPILE_TEST
select SM_GCC_6350
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on SM6350 devices.
Say Y if you want to support video devices and functionality such as
@@ -1667,6 +1783,7 @@ config SM_VIDEOCC_MILOS
depends on ARM64 || COMPILE_TEST
select SM_GCC_MILOS
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on Qualcomm Technologies, Inc.
Milos devices.
@@ -1688,6 +1805,7 @@ config SM_VIDEOCC_8250
depends on ARM64 || COMPILE_TEST
select SM_GCC_8250
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on SM8250 devices.
Say Y if you want to support video devices and functionality such as
@@ -1707,6 +1825,7 @@ config SM_VIDEOCC_8550
tristate "SM8550 Video Clock Controller"
depends on ARM64 || COMPILE_TEST
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on Qualcomm Technologies, Inc.
SM8550 or SM8650 or X1E80100 devices.
@@ -1718,6 +1837,7 @@ config SM_VIDEOCC_8750
depends on ARM64 || COMPILE_TEST
select SM_GCC_8750
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on Qualcomm Technologies, Inc.
SM8750 devices.
@@ -1758,6 +1878,7 @@ config KRAITCC
config CLK_GFM_LPASS_SM8250
tristate "SM8250 GFM LPASS Clocks"
depends on ARM64 || COMPILE_TEST
+ default m if ARCH_QCOM
help
Support for the Glitch Free Mux (GFM) Low power audio
subsystem (LPASS) clocks found on SM8250 SoCs.
@@ -1767,6 +1888,7 @@ config SM_VIDEOCC_8450
depends on ARM64 || COMPILE_TEST
select SM_GCC_8450
select QCOM_GDSC
+ default m if ARCH_QCOM
help
Support for the video clock controller on Qualcomm Technologies, Inc.
SM8450 or SM8475 devices.
--
2.53.0
More information about the linux-arm-kernel
mailing list