[PATCH v2 7/7] arm64: dts: qcom: shikra-iqs-evk-imx577-camera: Add DT overlay

[Bryan O'Donoghue]

On 08/06/2026 15:06, Nihal Kumar Gupta wrote:
> Shikra IQS is an industrial-grade variant using PM8150 PMIC, requiring
> different CSIPHY and sensor supply rails compared to the retail boards
> (CQM and CQS) which use PM4125.
> 
> Add a dedicated overlay for optional IMX577 integration via CSIPHY1.
> 
> Signed-off-by: Nihal Kumar Gupta <nihal.gupta at oss.qualcomm.com>
> ---
>   arch/arm64/boot/dts/qcom/Makefile                  |  2 +
>   .../dts/qcom/shikra-iqs-evk-imx577-camera.dtso     | 70 ++++++++++++++++++++++
>   arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts        |  9 +++
>   3 files changed, 81 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 76b8f144983827f4905a72935e8d5291a227dc97..09f2318d1c12c4239a6a7bac4ecbca38eb65ffa2 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -340,9 +340,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
>   
>   shikra-cqm-evk-imx577-camera-dtbs	:= shikra-cqm-evk.dtb shikra-cqm-cqs-evk-imx577-camera.dtbo
>   shikra-cqs-evk-imx577-camera-dtbs	:= shikra-cqs-evk.dtb shikra-cqm-cqs-evk-imx577-camera.dtbo
> +shikra-iqs-evk-imx577-camera-dtbs	:= shikra-iqs-evk.dtb shikra-iqs-evk-imx577-camera.dtbo
>   
>   dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk-imx577-camera.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk-imx577-camera.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk-imx577-camera.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
> diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso
> new file mode 100644
> index 0000000000000000000000000000000000000000..340d6303adc6e1bea55f1bd0598175f0cb269737
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/clock/qcom,shikra-gcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +&camss {
> +	vdd-csiphy-1p2-supply = <&pm8150_l11>;
> +	vdd-csiphy-1p8-supply = <&pm8150_l12>;
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 1 {
> +			reg = <1>;
> +
> +			csiphy1_ep: endpoint {
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&imx577_ep1>;
> +			};
> +		};
> +	};
> +};
> +
> +&cci {
> +	status = "okay";
> +};
> +
> +&cci_i2c1 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	camera at 1a {
> +		compatible = "sony,imx577";
> +		reg = <0x1a>;
> +
> +		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&cam_mclk1_default &cam1_reset_default>;
> +		pinctrl-names = "default";
> +
> +		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
> +		assigned-clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
> +		assigned-clock-rates = <24000000>;
> +
> +		/*
> +		 * avdd and dvdd are supplied by on-board regulators on the
> +		 * IMX577 module from the connector's 3.3 V rail; they are
> +		 * not SoC-controlled. dovdd (1.8 V) powers the carrier board
> +		 * level-shifter that translates CCI I2C and reset lines
> +		 * between the SoC and the connector.
> +		 */
> +		dovdd-supply = <&pm8150_l15>;
> +
> +		port {
> +			imx577_ep1: endpoint {
> +				link-frequencies = /bits/ 64 <600000000>;
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&csiphy1_ep>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
> index 3003a47bd7594206f0ac54957e0af509fa365f54..811fd5da4af7babd412d70fee84434849846dc2f 100644
> --- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
> @@ -38,3 +38,12 @@ &sdhc_1 {
>   
>   	status = "okay";
>   };
> +
> +&tlmm {
> +	cam1_reset_default: cam1-reset-default-state {
> +		pins = "gpio33";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +};
> 


Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>

---
bod