[PATCH v2] i2c: imx-lpi2c: fix resource leaks switching to devm_dma_request_chan()

[Andi Shyti]

Hi Carlos,

On Wed, May 20, 2026 at 05:33:23PM +0800, Carlos Song (OSS) wrote:
> From: Carlos Song <carlos.song at nxp.com>
> 
> The LPI2C driver requests DMA channels using dma_request_chan(), but
> never releases them in lpi2c_imx_remove(), resulting in DMA channel
> leaks every time the driver is unloaded.
> 
> Additionally, when lpi2c_dma_init() successfully requests the TX DMA
> channel but fails to request the RX DMA channel, the probe falls back
> to PIO mode and completes successfully. Since probe succeeds, the devres
> framework will not trigger any cleanup, leaving the TX DMA channel and
> the memory allocated for the dma structure held for the lifetime of the
> device even though DMA is never used.
> 
> Switch to devm_dma_request_chan() to let the device core manage DMA
> channel lifetime automatically. Wrap all allocations within a devres
> group so that devres_release_group() can release all partially acquired
> resources when DMA init fails and probe continues in PIO mode.
> 
> Fixes: a09c8b3f9047 ("i2c: imx-lpi2c: add eDMA mode support for LPI2C")
> Cc: stable at vger.kernel.org
> Signed-off-by: Carlos Song <carlos.song at nxp.com>

merged to i2c/i2c-host-fixes.

Thanks,
Andi