[v7 PATCH] arm64: mm: show direct mapping use in /proc/meminfo

[Yang Shi]

On 6/2/26 1:38 PM, Yang Shi wrote:
>
>
> On 6/2/26 7:51 AM, Will Deacon wrote:
>> On Tue, May 19, 2026 at 09:36:57AM -0700, Yang Shi wrote:
>>> Since commit a166563e7ec3 ("arm64: mm: support large block mapping when
>>> rodata=full"), the direct mapping may be split on some machines instead
>>> keeping static since boot. It makes more sense to show the direct 
>>> mapping
>>> use in /proc/meminfo than before.
>>> This patch will make /proc/meminfo show the direct mapping use like the
>>> below (4K base page size):
>>> DirectMap4K:       94792 kB
>>> DirectMap64K:     134208 kB
>>> DirectMap2M:     1173504 kB
>>> DirectMap32M:    5636096 kB
>>> DirectMap1G:    529530880 kB
>>>
>>> Although just the machines which support BBML2_NOABORT can split the
>>> direct mapping, show it on all machines regardless of BBML2_NOABORT so
>>> that the users have consistent view in order to avoid confusion.
>>>
>>> Although ptdump also can tell the direct map use, but it needs to dump
>>> the whole kernel page table. It is costly and overkilling. It is also
>>> in debugfs which may not be enabled by all distros. So showing direct
>>> map use in /proc/meminfo seems more convenient and has less overhead.
>>>
>>> Signed-off-by: Yang Shi<yang at os.amperecomputing.com>
>>> ---
>>>   arch/arm64/mm/mmu.c | 192 
>>> +++++++++++++++++++++++++++++++++++++++-----
>>>   1 file changed, 171 insertions(+), 21 deletions(-)
>>>
>>> v7: * Rebased to v7.1-rc4
>>>      * Changed "dm" to "lm" to follow ARM convention per Will
>>>      * Used __is_lm_alias() instead of reinventing a new helper per 
>>> Will
>> Thanks, but Sashiko has pointed out a few nasty issues:
>>
>> https://sashiko.dev/#/patchset/20260519163657.1259416-1-yang@os.amperecomputing.com 
>>
>>
>> In particular, the potential for races updating the shared counters and
>> double-accounting of entries due to permission changes look like
>> interesting things to check.
>
> Hi Will,
>
> Thanks for reminding for Sashiko review. Please see the below response.

It has been one week. I have not seen any objection, so I will proceed 
with v8.

Thanks,
Yang

>
> #1
>> When features like memfd_secret remove pages from the direct map by 
>> calling
>> set_direct_map_invalid_noflush(), it clears the PTE_VALID bit via the 
>> pageattr
>> infrastructure.
>> Since this patch doesn't hook into those callbacks or set_pte() to 
>> invoke
>> lm_meminfo_sub(), could the unmapped memory continue to be accounted 
>> for,
>> leading to a persistent mismatch between the actual direct map size 
>> and the
>> reported statistics?
>
> The direct mapping counters in /proc/meminfo don't treat invalid 
> direct mapping differently if I read the x86 code correctly, as long 
> as the range is still mapped by page table regardless whether it is 
> valid or not. The counters are just updated when the mapping is 
> created, removed (for example, boot stage or hot plug/unplug), split 
> and collapsed. It seems like transient invalid direct mapping is not 
> considered as "removed". And it seems not bother anyone.
>
> I think we should follow the semantics and keep the consistency. We 
> can definitely make changes in the future if it turns out to be a real 
> problem.
>
>
> #2
>> Could concurrent calls to functions like split_pmd() (e.g., via
>> set_memory_ro() or set_memory_rw() during BPF JIT allocations or module
>> loading) cause data races and lost updates here?
>> These updates use non-atomic read-modify-write operations, and
>> apply_to_page_range() only locks individual page tables rather than 
>> using a
>> global lock.
>
> Sounds like a false positive. The direct mapping page table split is 
> serialized by pgtable_split_lock.
>
>
> #3
>> Does this code, as well as similar sections in init_pmd() and
>> alloc_init_pud(), double-count memory regions when updating permissions
>> of existing direct mappings?
>> When functions like update_mapping_prot() change the permissions of 
>> existing
>> valid direct map entries, this will unconditionally add the size 
>> again without
>> checking if the entry was already present (e.g., checking pte_none() 
>> first)
>> or subtracting the old size.
>
> Yes, it may double count when updating permission because updating 
> permission reuses the same functions. It sounds not hard to address. 
> We can check whether PUD/PMD/PTE is none. If it is none it means 
> kernel is creating new page table, then we count it. If it not none, 
> we skip accounting.
>
>
> #4
>> If a portion of a contiguous block is hot-removed, could this multiple
>> subtraction underflow the counter?
>> On ARM64, the memory hotplug block size can be smaller than a 
>> contiguous block
>> size (e.g., CONT_PMD_SIZE is 16GB with 64K base pages). If a partial 
>> chunk is
>> removed, this subtracts the full CONT_PMD_SIZE. However, it leaves the
>> PTE_CONT bit intact on the remaining valid PMDs.
>> A subsequent removal in the same contiguous block would see the PTE_CONT
>> bit again and subtract the full CONT_PMD_SIZE a second time, 
>> underflowing the
>> counter.
>
> It sounds like a false positive to me. This case should not happen at 
> all. We just can't unplug a portion of DIMM, right?
>
> For example, we plug a 16G dimm to the machine. We can offline a 
> portion of it (at section granularity), but we can't unplug a portion 
> of it, we just can unplug the whole dimm. The counters update happens 
> when unplug.
>
> Thanks,
> Yang
>
>> Will
>