[PATCH net-next v2 01/14] dt-bindings: net: qca,qca808x: Add regulator properties

[Alex Elder]

From: Daniel Thompson <daniel at riscstar.com>

QCA808x has four different power rails (although in many board designs
the different rails share a regulator). Add each of these supplies
to the corresponding DT binding.

Signed-off-by: Daniel Thompson <daniel at riscstar.com>
Signed-off-by: Alex Elder <elder at riscstar.com>
---
 .../devicetree/bindings/net/qca,qca808x.yaml       | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/qca,qca808x.yaml b/Documentation/devicetree/bindings/net/qca,qca808x.yaml
index e2552655902a3..3c1b7eca33caf 100644
--- a/Documentation/devicetree/bindings/net/qca,qca808x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,qca808x.yaml
@@ -25,6 +25,18 @@ properties:
     enum:
       - ethernet-phy-id004d.d101
 
+  avdd18-supply:
+    description: 1.8v analog power supply.
+
+  vdd-supply:
+    description: 1.05v power supply.
+
+  vdd18-supply:
+    description: 1.8v power supply.
+
+  vdd125-supply:
+    description: (1.25v to 1.98v) LDO regulator power supply.
+
 unevaluatedProperties: false
 
 examples:
@@ -39,6 +51,8 @@ examples:
             compatible = "ethernet-phy-id004d.d101";
             reg = <0>;
 
+            vdd-supply = <&phy_vreg_1v8>;
+
             leds {
                 #address-cells = <1>;
                 #size-cells = <0>;
-- 
2.51.0