[RFC PATCH v3 9/9] arm64: dts: rockchip: rk3568-rock-3b: Enable the NPU

[Midgy BALON]

Enable the NPU and its IOMMU on ROCK 3B.

vdd_npu is marked always-on so the rail is up before genpd de-idles the
NPU NoC at power-on: the PMU de-idle handshake needs the rail powered.
The PVTPLL compute clock is brought up later by the driver.

Signed-off-by: Midgy BALON <midgy971 at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
index 69001e453732e..7ac780ed313d5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
@@ -330,8 +330,10 @@ regulator-state-mem {
 
 			vdd_npu: DCDC_REG4 {
 				regulator-name = "vdd_npu";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-initial-mode = <0x2>;
-				regulator-min-microvolt = <500000>;
+				regulator-min-microvolt = <825000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-ramp-delay = <6001>;
 
@@ -787,3 +789,13 @@ vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
 		remote-endpoint = <&hdmi_in_vp0>;
 	};
 };
+
+&rknn_core_0 {
+	npu-supply = <&vdd_npu>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
-- 
2.39.5