[PATCH v2 11/12] arm64: dts: imx8mp-var-som-symphony: enable PWM1

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r at variscite.com>

Enable PWM1 on the Symphony carrier board and add the corresponding
pinctrl configuration.

Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
---
v1->v2:
 - 

 .../boot/dts/freescale/imx8mp-var-som-symphony.dts   | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 91d24110a283..912d064a4ce1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -246,6 +246,12 @@ &pcie_phy {
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -398,6 +404,12 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT				0x116
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
-- 
2.47.3