[PATCH v1 09/12] arm64: dts: imx8mp-var-som-symphony: enable ECSPI2

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r at variscite.com>

Enable the ECSPI2 bus on the Symphony carrier board and add the pinctrl
configuration for the SPI signals and chip select GPIO.

Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 9622f77f8f13..df4409af26a2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -99,6 +99,13 @@ &aud2htx {
 	status = "okay";
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &hdmi_pai {
 	status = "okay";
 };
@@ -321,6 +328,15 @@ MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK				0x12
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI				0x12
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO				0x12
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13				0x12
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
-- 
2.47.3