[PATCH v1 06/12] arm64: dts: imx8mp-var-som-symphony: enable PCIe

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r at variscite.com>

Add the PCIe reference clock and enable the PCIe controller and PHY on
the Symphony carrier board.

Describe the reset GPIO and configure the PHY to use an external
reference clock input.

Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 3dda28be92f8..fe1699649414 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,12 @@ led-0 {
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -146,6 +152,18 @@ rtc at 68 {
 	};
 };
 
+&pcie {
+	reset-gpio = <&pcal6408 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
-- 
2.47.3