[PATCH v3 3/5] arm64: dts: imx93-var-som-symphony: keep RGB_SEL low

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r at variscite.com>

Keep the RGB_SEL line driven low on the Symphony carrier board.

This avoids leaving the line floating and ensures the board remains in
the expected display configuration.

Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
---
v2->v3:
 - 

v1->v2:
 - 

 arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
index 77377127c18c..c835394468ef 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -215,6 +215,14 @@ pcal6408: gpio at 21 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		status = "okay";
+
+		/* RGB_SEL */
+		lvds-brg-enable-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "lvds_brg_en";
+		};
 	};
 
 	st33ktpm2xi2c: tpm at 2e {
-- 
2.47.3