[PATCH v3 4/5] phy: fsl-imx8mq-usb: add control register regmap

[Xu Yang]

From: Xu Yang <xu.yang_2 at nxp.com>

The CR port is a simple 16-bit data/address parallel port that is
provided for on-chip access to the control registers inside the
USB 3.0 femtoPHY. Add control register regmap and export these
registers by debugfs to help PHY's diagnostic.

Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>

---
Changes in v3:
 - drop Frank's tag because it includes other changes
 - new patch
---
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index b0092c34416e..cda88ea1f12d 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0+
-/* Copyright (c) 2017 NXP. */
+/* Copyright 2017-2026 NXP. */
 
 #include <linux/bitfield.h>
 #include <linux/clk.h>
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
 #include <linux/usb/typec_mux.h>
 
 #define PHY_CTRL0			0x0
@@ -56,6 +57,8 @@
 #define PHY_CTRL6_ALT_CLK_EN		BIT(1)
 #define PHY_CTRL6_ALT_CLK_SEL		BIT(0)
 
+#define PHY_CRCTL			0x30
+
 #define PHY_TUNE_DEFAULT		0xffffffff
 
 #define TCA_CLK_RST			0x00
@@ -119,6 +122,7 @@ struct imx8mq_usb_phy {
 	void __iomem *base;
 	struct regulator *vbus;
 	struct tca_blk *tca;
+	struct regmap *cr_regmap;
 	u32 pcs_tx_swing_full;
 	u32 pcs_tx_deemph_3p5db;
 	u32 tx_vref_tune;
@@ -665,6 +669,14 @@ static const struct of_device_id imx8mq_usb_phy_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
 
+static const struct regmap_config imx_cr_regmap_config = {
+	.name = "cr",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x7,
+};
+
 static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
@@ -694,6 +706,13 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_phy->base))
 		return PTR_ERR(imx_phy->base);
 
+	imx_phy->cr_regmap = devm_regmap_init_mmio(dev, imx_phy->base + PHY_CRCTL,
+						   &imx_cr_regmap_config);
+	if (IS_ERR(imx_phy->cr_regmap)) {
+		dev_warn(dev, "Fail to init debug register regmap\n");
+		imx_phy->cr_regmap = NULL;
+	}
+
 	ret = devm_pm_runtime_set_active_enabled(dev);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
@@ -729,6 +748,9 @@ static int imx8mq_usb_phy_runtime_suspend(struct device *dev)
 {
 	struct imx8mq_usb_phy *imx_phy = dev_get_drvdata(dev);
 
+	if (imx_phy->cr_regmap)
+		regcache_cache_only(imx_phy->cr_regmap, true);
+
 	clk_disable_unprepare(imx_phy->alt_clk);
 	clk_disable_unprepare(imx_phy->clk);
 
@@ -750,6 +772,9 @@ static int imx8mq_usb_phy_runtime_resume(struct device *dev)
 		return ret;
 	}
 
+	if (imx_phy->cr_regmap)
+		regcache_cache_only(imx_phy->cr_regmap, false);
+
 	return 0;
 }
 

-- 
2.34.1