[PATCH v6 1/4] dt-bindings: pci: Strictly distinguish C0 from C1-C5

[Rob Herring (Arm)]

On Tue, 02 Jun 2026 13:33:23 +0200, Thierry Reding wrote:
> From: Thierry Reding <treding at nvidia.com>
> 
> Instead of using the ECAM registers as the first entry, strictly make a
> distinction between C0 and C1-C5. This is needed because otherwise the
> unit address doesn't match the first "reg" entry. We also cannot change
> the ordering of these nodes to follow the ECAM addresses because that
> would put them outside of their "control bus" hierarchy since the ECAM
> address space is a global one outside of any of the control busses.
> 
> Signed-off-by: Thierry Reding <treding at nvidia.com>
> ---
> Changes in v6:
> - add maxItems as suggested by Sashiko
> 
> Changes in v5:
> - rebase on top of v7.1-rc1, make it into a fix
> 
> Changes in v4:
> - ECAM is outside of the controller's region, so it cannot be the first
>   reg entry, otherwise we get warnings because it doesn't match the
>   unit-address, so revert back to oneOf construct
> 
> Changes in v2:
> - move ECAM region first and unify C0 vs. C1-C5
> - move unevaluatedProperties to right before the examples
> - add description to clarify the two types of controllers
> - add examples for C0 and C1-C5
> ---
>  .../bindings/pci/nvidia,tegra264-pcie.yaml         | 79 +++++++++++++++-------
>  1 file changed, 54 insertions(+), 25 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/nvidia,tegra264-pcie.yaml: allOf:1:oneOf:0:properties:reg-names: {'maxItems': 4, 'items': [{'const': 'xal'}, {'const': 'xtl'}, {'const': 'xtl-pri'}, {'const': 'ecam'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/nvidia,tegra264-pcie.yaml: allOf:1:oneOf:0:properties:reg: {'maxItems': 4, 'items': [{'description': 'application layer registers'}, {'description': 'transaction layer registers'}, {'description': 'privileged transaction layer registers'}, {'description': 'ECAM compatible configuration space'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/nvidia,tegra264-pcie.yaml: allOf:1:oneOf:1:properties:reg-names: {'maxItems': 5, 'items': [{'const': 'xal'}, {'const': 'xtl'}, {'const': 'xtl-pri'}, {'const': 'xpl'}, {'const': 'ecam'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/nvidia,tegra264-pcie.yaml: allOf:1:oneOf:1:properties:reg: {'maxItems': 5, 'items': [{'description': 'application layer registers'}, {'description': 'transaction layer registers'}, {'description': 'privileged transaction layer registers'}, {'description': 'data link/physical layer registers'}, {'description': 'ECAM compatible configuration space'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260602-tegra264-pcie-v6-1-edbcfa7a78fe@nvidia.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.