[PATCH v7 13/19] dt-bindings: dma: ti: Add K3 BCDMA V2

[Krzysztof Kozlowski]

On Fri, Jul 24, 2026 at 03:50:46PM +0530, Sai Sree Kartheek Adivi wrote:
> +  "#dma-cells":
> +    const: 4
> +    description: |
> +      cell 1: Trigger type for the channel
> +        0 - disable / no trigger
> +        1 - internal channel event
> +        2 - external signal
> +        3 - timer manager event
> +
> +      cell 2: parameter for the trigger:
> +        if cell 1 is 0 (disable / no trigger):
> +          Unused, ignored
> +        if cell 1 is 1 (internal channel event):
> +          channel number whose TR event should trigger the current channel.
> +        if cell 1 is 2 or 3 (external signal or timer manager event):
> +          index of global interfaces that come into the DMA.
> +
> +          Please refer to the device documentation for global interface indexes.
> +
> +      cell 3: Channel ID for the peripheral
> +        This is the mapped_channel_id assigned to the peripheral in the PSI-L
> +        endpoint map. For XYMF peripherals (SPI, CRC32) each chip-select/FIFO
> +        has a distinct channel ID; use the channel ID for the specific
> +        direction and chip-select being requested. Use 0 for triggered
> +        block-copy channels (cell 1 != 0).
> +
> +        Please refer to the device documentation for the channel map.
> +
> +      cell 4: ASEL value for the channel
> +
> +  interrupts:
> +    minItems: 75

You can drop this

> +    maxItems: 75
> +    description:
> +      Interrupts for DMA channels.
> +
> +  interrupt-names:
> +    minItems: 75

And this as well, implied by maxItems.

With these:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>

Best regards,
Krzysztof