[PATCH 2/2] iommu/arm-smmu-v3: Override for Inst/Data attribute

[Nicolin Chen]

On Fri, Jul 24, 2026 at 01:39:43PM +0100, Peter Griffin wrote:
> @@ -1206,7 +1207,8 @@ void arm_smmu_get_ste_used(const __le64 *ent, __le64 *used_bits)
>  			cpu_to_le64(STRTAB_STE_1_S1DSS | STRTAB_STE_1_S1CIR |
>  				    STRTAB_STE_1_S1COR | STRTAB_STE_1_S1CSH |
>  				    STRTAB_STE_1_S1STALLD | STRTAB_STE_1_STRW |
> -				    STRTAB_STE_1_EATS | STRTAB_STE_1_MEV);
> +				    STRTAB_STE_1_EATS | STRTAB_STE_1_MEV |
> +				    STRTAB_STE_1_INSTCFG);
>  		used_bits[2] |= cpu_to_le64(STRTAB_STE_2_S2VMID);
>  
>  		/*
> @@ -1222,7 +1224,8 @@ void arm_smmu_get_ste_used(const __le64 *ent, __le64 *used_bits)
>  	if (cfg & BIT(1)) {
>  		used_bits[1] |=
>  			cpu_to_le64(STRTAB_STE_1_S2FWB | STRTAB_STE_1_EATS |
> -				    STRTAB_STE_1_SHCFG | STRTAB_STE_1_MEV);
> +				    STRTAB_STE_1_SHCFG | STRTAB_STE_1_MEV |
> +				    STRTAB_STE_1_INSTCFG);
>  		used_bits[2] |=
>  			cpu_to_le64(STRTAB_STE_2_S2VMID | STRTAB_STE_2_VTCR |
>  				    STRTAB_STE_2_S2AA64 | STRTAB_STE_2_S2ENDI |

This adds for "stage-1" and "stage-2", while missing "bypass"?

> @@ -1835,7 +1838,11 @@ void arm_smmu_make_cdtable_ste(struct arm_smmu_ste *target,
>  			 STRTAB_STE_1_S1STALLD :
>  			 0) |
>  		FIELD_PREP(STRTAB_STE_1_EATS,
> -			   ats_enabled ? STRTAB_STE_1_EATS_TRANS : 0));
> +			   ats_enabled ? STRTAB_STE_1_EATS_TRANS : 0)) |
> +		FIELD_PREP(STRTAB_STE_1_INSTCFG,
> +			   smmu->options & ARM_SMMU_OPT_OVR_INSTCFG_DATA ?
> +				   STRTAB_STE_1_INSTCFG_DATA :
> +				   STRTAB_STE_1_INSTCFG_INCOMING);

Sashiko pointed out that this prematurely closes the cpu_to_le64()
macro.

> @@ -1887,7 +1894,11 @@ void arm_smmu_make_s2_domain_ste(struct arm_smmu_ste *target,
>  
>  	target->data[1] = cpu_to_le64(
>  		FIELD_PREP(STRTAB_STE_1_EATS,
> -			   ats_enabled ? STRTAB_STE_1_EATS_TRANS : 0));
> +			   ats_enabled ? STRTAB_STE_1_EATS_TRANS : 0) |
> +		FIELD_PREP(STRTAB_STE_1_INSTCFG,
> +			   smmu->options & ARM_SMMU_OPT_OVR_INSTCFG_DATA ?
> +				   STRTAB_STE_1_INSTCFG_DATA :
> +				   STRTAB_STE_1_INSTCFG_INCOMING));

You might need to set in arm_smmu_make_bypass_ste() too.

> @@ -5087,6 +5098,13 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>  	if (smmu->sid_bits <= STRTAB_SPLIT)
>  		smmu->features &= ~ARM_SMMU_FEAT_2_LVL_STRTAB;
>  
> +	if (reg & IDR1_ATTR_PERMS_OVR) {
> +		smmu->features |= ARM_SMMU_FEAT_PERMS_OVR;

Where does this new feature bit get used?

Nicolin