[PATCH v1 1/3] ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 7" Parallel

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

Add a device tree overlay for the Capacitive Touch Display 7" Parallel
on the Colibri iMX7 parallel RGB LCD interface.

The panel is a LogicTechno LT161010-2NHC 7" WVGA TFT Transmissive LCD
and the touch input is provided by an Atmel MaxTouch capacitive touch
controller.

The touch controller is connected to the Toradex 10-way Capacitive Touch
Interface connector available on Iris v2 and Aster carrier boards.

The overlay is also combined with the Iris v2 and Aster carrier board
device tree to provide a ready-to-use DTB.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-7inch-parallel/
Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile            | 12 ++++++
 ...i-emmc-panel-cap-touch-7inch-parallel.dtso | 43 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtso

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 1a2539fa19b4..4d2730000202 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -419,13 +419,25 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-var-som-concerto-full.dtb \
 	imx6ulz-14x14-evk.dtb \
 	imx6ulz-bsh-smm-m2.dtb
+
+imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel-dtbs := \
+	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo
+
+imx7d-colibri-emmc-iris-v2-panel-cap-touch-7inch-parallel-dtbs := \
+	imx7d-colibri-emmc-iris-v2.dtb \
+	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo
+
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-aster.dtb \
 	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-aster-panel-cap-touch-7inch-parallel.dtb \
 	imx7d-colibri-emmc-iris.dtb \
 	imx7d-colibri-emmc-iris-v2.dtb \
+	imx7d-colibri-emmc-iris-v2-panel-cap-touch-7inch-parallel.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
+	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-colibri-iris.dtb \
 	imx7d-colibri-iris-v2.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtso b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtso
new file mode 100644
index 000000000000..f336f7b05a2b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtso
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 7" Parallel connected through the 40-way
+ * Unified Interface Display and 10-way Capacitive Touch Interface connectors
+ * (as featured on Iris v2 and Aster v1.1 carrier boards).
+ *
+ * https://docs.toradex.com/104497-7-inch-parallel-capacitive-touch-display-800x480-datasheet.pdf
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-7inch-parallel/
+ * https://www.toradex.com/accessories/capacitive-touch-display-7-inch-parallel
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&atmel_mxt_ts {
+	pinctrl-0 = <&pinctrl_atmel_connector>;
+	/* SODIMM 107 / TOUCH_INT# */
+	interrupt-parent = <&gpio2>;
+	interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+	/* SODIMM 106 / TOUCH_RST# */
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	compatible = "logictechno,lt161010-2nhc";
+
+	status = "okay";
+};
-- 
2.47.3