[PATCH v2 1/3] arm64: dts: imx93-11x11-frdm: factor out common parts into dtsi
Joseph Guo
qijian.guo at nxp.com
Thu Jul 23 00:13:21 PDT 2026
The i.MX93 Wireless FRDM board reuses most of the i.MX93 FRDM board.
To avoid duplication and DTS-to-DTS includes, extract common hardware
definitions from imx93-11x11-frdm.dts into imx93-11x11-frdm-common.dtsi
to allow the common description shared by both boards.
The FRDM-IMX93 board-specific .dts now includes the common dtsi and only
contains board-specific overrides.
Signed-off-by: Joseph Guo <qijian.guo at nxp.com>
---
Changes in v2:
- Move board specific lpuart5 pin assignment to board dts.
- Move pcal6408 node to board dts
---
...11x11-frdm.dts => imx93-11x11-frdm-common.dtsi} | 129 +---
arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 679 +--------------------
2 files changed, 7 insertions(+), 801 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
similarity index 82%
copy from arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
copy to arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
index bd14ba28690c081817111aaabef12fb56a7c56a4..5c8fdd77ec15b94dc21b0149374b8107d27d81b9 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
@@ -1,13 +1,8 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/dts-v1/;
#include <dt-bindings/usb/pd.h>
-#include "imx93.dtsi"
/ {
- compatible = "fsl,imx93-11x11-frdm", "fsl,imx93";
- model = "NXP i.MX93 11X11 FRDM board";
-
aliases {
can0 = &flexcan2;
ethernet0 = &fec;
@@ -66,16 +61,6 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
enable-active-high;
};
- reg_usdhc3_vmmc: regulator-usdhc3 {
- compatible = "regulator-fixed";
- regulator-name = "VPCIe_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <20000>;
- gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
reserved-memory {
ranges;
#address-cells = <2>;
@@ -120,18 +105,6 @@ vdevbuffer: vdevbuffer at a4020000 {
no-map;
};
};
-
- sound-mqs {
- compatible = "fsl,imx-audio-mqs";
- model = "mqs-audio";
- audio-cpu = <&sai1>;
- audio-codec = <&mqs1>;
- };
-
- usdhc3_pwrseq: mmc-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
- };
};
&adc1 {
@@ -214,14 +187,6 @@ &lpi2c1 {
pinctrl-0 = <&pinctrl_lpi2c1>;
pinctrl-names = "default";
status = "okay";
-
- pcal6408: gpio at 20 {
- compatible = "nxp,pcal6408";
- reg = <0x20>;
- #gpio-cells = <2>;
- gpio-controller;
- reset-gpios = <&pcal6524 20 GPIO_ACTIVE_LOW>;
- };
};
&lpi2c2 {
@@ -389,35 +354,11 @@ &lpuart5 {
uart-has-rtscts;
- bluetooth {
+ bluetooth: bluetooth {
compatible = "nxp,88w8987-bt";
- device-wakeup-gpios = <&pcal6408 3 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&pcal6524 19 GPIO_ACTIVE_LOW>;
- vcc-supply = <®_usdhc3_vmmc>;
};
};
-&mqs1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mqs1>;
- clocks = <&clk IMX93_CLK_MQS1_GATE>;
- clock-names = "mclk";
- status = "okay";
-};
-
-&sai1 {
- #sound-dai-cells = <0>;
- clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_DUMMY>, <&clk IMX93_CLK_AUDIO_PLL>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k";
- assigned-clocks = <&clk IMX93_CLK_SAI1>;
- assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
- assigned-clock-rates = <24576000>;
- fsl,sai-mclk-direction-output;
- status = "okay";
-};
-
&usbotg1 {
adp-disable;
disable-over-current;
@@ -469,20 +410,6 @@ &usdhc2 {
status = "okay";
};
-&usdhc3 {
- bus-width = <4>;
- keep-power-in-suspend;
- mmc-pwrseq = <&usdhc3_pwrseq>;
- non-removable;
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- pinctrl-3 = <&pinctrl_usdhc3_sleep>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- vmmc-supply = <®_usdhc3_vmmc>;
- status = "okay";
-};
-
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -603,13 +530,6 @@ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
>;
};
- pinctrl_mqs1: mqs1grp {
- fsl,pins = <
- MX93_PAD_PDM_CLK__MQS1_LEFT 0x31e
- MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x31e
- >;
- };
-
pinctrl_pcal6524: pcal6524grp {
fsl,pins = <
MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
@@ -752,53 +672,6 @@ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
>;
};
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
- MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
- MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
- MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
- MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
- MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
- fsl,pins = <
- MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
- MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
- MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
- MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
- MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
- MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
- fsl,pins = <
- MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
- MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
- MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
- MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
- MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
- MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
- >;
- };
-
- pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
- fsl,pins = <
- MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
- MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
- MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
- MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
- MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
- MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
- >;
- };
-
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
index bd14ba28690c081817111aaabef12fb56a7c56a4..8034992a73c7e3fd6db05fe67d01ae9a9d5c547b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
@@ -1,71 +1,14 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
/dts-v1/;
-#include <dt-bindings/usb/pd.h>
#include "imx93.dtsi"
+#include "imx93-11x11-frdm-common.dtsi"
/ {
compatible = "fsl,imx93-11x11-frdm", "fsl,imx93";
model = "NXP i.MX93 11X11 FRDM board";
- aliases {
- can0 = &flexcan2;
- ethernet0 = &fec;
- ethernet1 = &eqos;
- i2c0 = &lpi2c1;
- i2c1 = &lpi2c2;
- i2c2 = &lpi2c3;
- mmc0 = &usdhc1; /* EMMC */
- mmc1 = &usdhc2; /* uSD */
- rtc0 = &pcf2131;
- serial0 = &lpuart1;
- serial4 = &lpuart5;
- };
-
- chosen {
- stdout-path = &lpuart1;
- };
-
- flexcan2_phy: can-phy {
- compatible = "nxp,tja1051";
- #phy-cells = <0>;
- max-bitrate = <5000000>;
- silent-gpios = <&pcal6524 23 GPIO_ACTIVE_HIGH>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- button-k2 {
- label = "Button K2";
- linux,code = <BTN_1>;
- gpios = <&pcal6524 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- interrupt-parent = <&pcal6524>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- };
-
- button-k3 {
- label = "Button K3";
- linux,code = <BTN_2>;
- gpios = <&pcal6524 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- interrupt-parent = <&pcal6524>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
- };
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- off-on-delay-us = <12000>;
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- pinctrl-names = "default";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "VSD_3V3";
- vin-supply = <&buck4>;
- gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
reg_usdhc3_vmmc: regulator-usdhc3 {
compatible = "regulator-fixed";
regulator-name = "VPCIe_3V3";
@@ -76,51 +19,6 @@ reg_usdhc3_vmmc: regulator-usdhc3 {
enable-active-high;
};
- reserved-memory {
- ranges;
- #address-cells = <2>;
- #size-cells = <2>;
-
- linux,cma {
- compatible = "shared-dma-pool";
- alloc-ranges = <0 0x80000000 0 0x30000000>;
- reusable;
- size = <0 0x10000000>;
- linux,cma-default;
- };
-
- rsc_table: rsc-table at 2021e000 {
- reg = <0 0x2021e000 0 0x1000>;
- no-map;
- };
-
- vdev0vring0: vdev0vring0 at a4000000 {
- reg = <0 0xa4000000 0 0x8000>;
- no-map;
- };
-
- vdev0vring1: vdev0vring1 at a4008000 {
- reg = <0 0xa4008000 0 0x8000>;
- no-map;
- };
-
- vdev1vring0: vdev1vring0 at a4010000 {
- reg = <0 0xa4010000 0 0x8000>;
- no-map;
- };
-
- vdev1vring1: vdev1vring1 at a4018000 {
- reg = <0 0xa4018000 0 0x8000>;
- no-map;
- };
-
- vdevbuffer: vdevbuffer at a4020000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa4020000 0 0x100000>;
- no-map;
- };
- };
-
sound-mqs {
compatible = "fsl,imx-audio-mqs";
model = "mqs-audio";
@@ -134,87 +32,13 @@ usdhc3_pwrseq: mmc-pwrseq {
};
};
-&adc1 {
- vref-supply = <&buck5>;
- status = "okay";
-};
-
-&mu1 {
- status = "okay";
-};
-
-&cm33 {
- mboxes = <&mu1 0 1>,
- <&mu1 1 1>,
- <&mu1 3 1>;
- mbox-names = "tx", "rx", "rxdb";
- memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
- <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
- status = "okay";
-};
-
-&eqos {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pinctrl_eqos>;
- pinctrl-1 = <&pinctrl_eqos_sleep>;
- phy-handle = <ðphy1>;
- phy-mode = "rgmii-id";
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <5000000>;
-
- ethphy1: ethernet-phy at 1 {
- reg = <1>;
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
- realtek,clkout-disable;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pinctrl_fec>;
- pinctrl-1 = <&pinctrl_fec_sleep>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy2>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <5000000>;
-
- ethphy2: ethernet-phy at 2 {
- reg = <2>;
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
- realtek,clkout-disable;
- };
- };
-};
-
-&flexcan2 {
- phys = <&flexcan2_phy>;
- pinctrl-0 = <&pinctrl_flexcan2>;
- pinctrl-1 = <&pinctrl_flexcan2_sleep>;
- pinctrl-names = "default", "sleep";
- status = "okay";
+&bluetooth {
+ device-wakeup-gpios = <&pcal6408 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pcal6524 19 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_usdhc3_vmmc>;
};
&lpi2c1 {
- clock-frequency = <400000>;
- pinctrl-0 = <&pinctrl_lpi2c1>;
- pinctrl-names = "default";
- status = "okay";
-
pcal6408: gpio at 20 {
compatible = "nxp,pcal6408";
reg = <0x20>;
@@ -224,179 +48,6 @@ pcal6408: gpio at 20 {
};
};
-&lpi2c2 {
- clock-frequency = <400000>;
- pinctrl-0 = <&pinctrl_lpi2c2>;
- pinctrl-names = "default";
- status = "okay";
-
- pcal6524: gpio at 22 {
- compatible = "nxp,pcal6524";
- reg = <0x22>;
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- #gpio-cells = <2>;
- gpio-controller;
- pinctrl-0 = <&pinctrl_pcal6524>;
- pinctrl-names = "default";
- /* does not boot with supplier set, because it is the bucks interrupt parent */
- /* vcc-supply = <&buck4>; */
- };
-
- pmic at 25 {
- compatible = "nxp,pca9451a";
- reg = <0x25>;
- interrupt-parent = <&pcal6524>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-
- regulators {
-
- buck1: BUCK1 {
- regulator-name = "VDD_SOC_0V8";
- regulator-min-microvolt = <610000>;
- regulator-max-microvolt = <950000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck2: BUCK2 {
- regulator-name = "LPD4_x_VDDQ_0V6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <670000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck4: BUCK4 {
- regulator-name = "VDD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5: BUCK5 {
- regulator-name = "VDD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6: BUCK6 {
- regulator-name = "LPD4_x_VDD2_1V1";
- regulator-min-microvolt = <1060000>;
- regulator-max-microvolt = <1140000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo1: LDO1 {
- regulator-name = "NVCC_BBSM_1V8";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "VDD_ANA_0V8";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <840000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo5: LDO5 {
- regulator-name = "NVCC_SD";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-
- eeprom: eeprom at 50 {
- compatible = "atmel,24c256";
- reg = <0x50>;
- pagesize = <64>;
- vcc-supply = <&buck4>;
- };
-};
-
-&lpi2c3 {
- clock-frequency = <400000>;
- pinctrl-0 = <&pinctrl_lpi2c3>;
- pinctrl-names = "default";
- status = "okay";
-
- ptn5110: tcpc at 50 {
- compatible = "nxp,ptn5110", "tcpci";
- reg = <0x50>;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
- typec1_con: connector {
- compatible = "usb-c-connector";
- data-role = "dual";
- label = "USB-C";
- op-sink-microwatt = <15000000>;
- power-role = "dual";
- self-powered;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(5000, 20000, 3000)>;
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- try-power-role = "sink";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
-
- typec1_dr_sw: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
- };
- };
- };
-
- pcf2131: rtc at 53 {
- compatible = "nxp,pcf2131";
- reg = <0x53>;
- interrupt-parent = <&pcal6524>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
-&lpuart1 { /* console */
- pinctrl-0 = <&pinctrl_uart1>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&lpuart5 {
- pinctrl-0 = <&pinctrl_uart5>;
- pinctrl-names = "default";
- status = "okay";
-
- uart-has-rtscts;
-
- bluetooth {
- compatible = "nxp,88w8987-bt";
- device-wakeup-gpios = <&pcal6408 3 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&pcal6524 19 GPIO_ACTIVE_LOW>;
- vcc-supply = <®_usdhc3_vmmc>;
- };
-};
-
&mqs1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mqs1>;
@@ -418,57 +69,6 @@ &sai1 {
status = "okay";
};
-&usbotg1 {
- adp-disable;
- disable-over-current;
- dr_mode = "otg";
- hnp-disable;
- srp-disable;
- usb-role-switch;
- samsung,picophy-dc-vol-level-adjust = <7>;
- samsung,picophy-pre-emp-curr-control = <3>;
- status = "okay";
-
- port {
- usb1_drd_sw: endpoint {
- remote-endpoint = <&typec1_dr_sw>;
- };
- };
-};
-
-&usbotg2 {
- disable-over-current;
- dr_mode = "host";
- samsung,picophy-dc-vol-level-adjust = <7>;
- samsung,picophy-pre-emp-curr-control = <3>;
- status = "okay";
-};
-
-&usdhc1 {
- bus-width = <8>;
- non-removable;
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- vmmc-supply = <&buck4>;
- status = "okay";
-};
-
-&usdhc2 {
- bus-width = <4>;
- cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
- no-mmc;
- no-sdio;
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- vmmc-supply = <®_usdhc2_vmmc>;
- status = "okay";
-};
-
&usdhc3 {
bus-width = <4>;
keep-power-in-suspend;
@@ -483,126 +83,7 @@ &usdhc3 {
status = "okay";
};
-&wdog3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
&iomuxc {
-
- pinctrl_eqos: eqosgrp {
- fsl,pins = <
- MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
- MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
- MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
- MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
- MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
- MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
- MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
- MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
- MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
- MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
- MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
- MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
- MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
- >;
- };
-
- pinctrl_eqos_sleep: eqossleepgrp {
- fsl,pins = <
- MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e
- MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e
- MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e
- MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e
- MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e
- MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e
- MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e
- MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e
- MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e
- MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e
- MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e
- MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e
- MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e
- MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e
- >;
- };
-
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
- MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
- MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
- MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
- MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
- MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
- MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e
- MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
- MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
- MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
- MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
- MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
- MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
- MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
- >;
- };
-
- pinctrl_fec_sleep: fecsleepgrp {
- fsl,pins = <
- MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e
- MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
- MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e
- MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e
- MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e
- MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e
- MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e
- MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
- MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e
- MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e
- MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e
- MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e
- MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e
- MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
- MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
- >;
- };
-
- pinctrl_flexcan2_sleep: flexcan2sleepgrp {
- fsl,pins = <
- MX93_PAD_GPIO_IO25__GPIO2_IO25 0x31e
- MX93_PAD_GPIO_IO27__GPIO2_IO27 0x31e
- >;
- };
-
- pinctrl_lpi2c1: lpi2c1grp {
- fsl,pins = <
- MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
- MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
- >;
- };
-
- pinctrl_lpi2c2: lpi2c2grp {
- fsl,pins = <
- MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
- MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
- >;
- };
-
- pinctrl_lpi2c3: lpi2c3grp {
- fsl,pins = <
- MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
- MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
- >;
- };
-
pinctrl_mqs1: mqs1grp {
fsl,pins = <
MX93_PAD_PDM_CLK__MQS1_LEFT 0x31e
@@ -610,149 +91,7 @@ MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x31e
>;
};
- pinctrl_pcal6524: pcal6524grp {
- fsl,pins = <
- MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
- fsl,pins = <
- MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
- MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
- MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
- MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
- MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
- >;
- };
-
/* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2gpiogrp {
- fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
- >;
- };
-
- pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
- fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-
- pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__GPIO3_IO01 0x51e
- MX93_PAD_SD2_CMD__GPIO3_IO02 0x51e
- MX93_PAD_SD2_DATA0__GPIO3_IO03 0x51e
- MX93_PAD_SD2_DATA1__GPIO3_IO04 0x51e
- MX93_PAD_SD2_DATA2__GPIO3_IO05 0x51e
- MX93_PAD_SD2_DATA3__GPIO3_IO06 0x51e
- MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
@@ -798,10 +137,4 @@ MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
>;
};
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
- >;
- };
};
--
2.34.1
More information about the linux-arm-kernel
mailing list