[PATCH v2 0/3] media: rc: sunxi-cir: support the A523/H728/T527 IR receiver
Andre Przywara
andre.przywara at arm.com
Wed Jul 22 15:31:15 PDT 2026
On Wed, 22 Jul 2026 16:17:14 -0400
Justin Suess <utilityemal77 at gmail.com> wrote:
Hi Justin,
> Sorry for the delay,
no worries, thanks for the update.
> This is v2 of the series that adds support for the CIR
> receiver found in the Allwinner A523/T527/H728 family (sun55i).
>
> Unlike the previous version of the series, this version has no driver changes,
> and just uses a fallback compatible and enables the receiver.
>
> Tested again on my X96Q Pro+ (H728) TV box with the Google TV remote that
> came in the box (using NEC keymap). Was able to press buttons and
> get readings from lirc / ir-keytable again.
this all looks good to me. As mentioned on the individual patches, I
tested this on two boards here. I sent a patch [1] to enable IR on the
Avaota board, which goes on top of this series.
[1]
https://lore.kernel.org/linux-sunxi/20260722222627.14138-1-andre.przywara@arm.com/T/#u
> The series is (re)based on tag v7.2-rc4 on mainline.
Please base your submissions on -rc1, that simplifies merging/rebasing
for the maintainers, because then all new patches have the same base.
Not a particular problem for this series, since everything still applies
cleanly, but keep that in mind for future submissions.
Cheers,
Andre
>
> Justin Suess (3):
> media: dt-bindings: allwinner,sun4i-a10-ir: add A523 compatible
> arm64: dts: allwinner: a523: add IR receiver nodes
> arm64: dts: allwinner: a523: enable IR receiver on the X96Q Pro+
>
> .../media/allwinner,sun4i-a10-ir.yaml | 8 ++++--
> .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 28 +++++++++++++++++++
> .../dts/allwinner/sun55i-h728-x96qpro+.dts | 6 ++++
> 3 files changed, 39 insertions(+), 3 deletions(-)
>
>
> base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
More information about the linux-arm-kernel
mailing list