[PATCH v2 3/3] ARM: dts: sun9i-a80: Add thermal sensor and thermal zones

[Sören Hantel]

From: Philipp Rossak <embed3d at gmail.com>

Now that the A80 thermal sensor is supported, add its device node and
the thermal zones to the device tree.

The clocks and the resets are shared between the GPADC and the THS
sensor. Sensor 0 is located beside the big CPU cluster, sensor 1
beside the DRAM controller, sensor 2 beside the GPU and sensor 3
beside the little CPU cluster.

Signed-off-by: Philipp Rossak <embed3d at gmail.com>
[soeren: rebased from the 2018 series, fixed the interrupt number
(SPI 115 as in the vendor BSP; verified on hardware - SPI 31 stays
silent), added critical trip points matching the driver's emergency
shutdown threshold]
Co-authored-by: Claude Fable 5 <noreply at anthropic.com>
Signed-off-by: Sören Hantel <fugininsane at googlemail.com>
---
 arch/arm/boot/dts/allwinner/sun9i-a80.dtsi | 68 ++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
index a1ae092..8e7f8cd 100644
--- a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -941,6 +941,16 @@
 			#reset-cells = <1>;
 		};
 
+		ths: thermal-sensor at 6004c00 {
+			compatible = "allwinner,sun9i-a80-ths";
+			reg = <0x06004c00 0x100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_GPADC>, <&ccu CLK_GPADC>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_GPADC>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer at 6000c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x06000c00 0xa0>;
@@ -1250,4 +1260,62 @@
 			#size-cells = <0>;
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_crit: cpu0-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dram_thermal: dram-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				dram_crit: dram-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu_crit: gpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 3>;
+
+			trips {
+				cpu2_crit: cpu2-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
-- 
2.43.0