[PATCH v2 2/2] ARM: dts: aspeed-g6: add pcie-kcs4

[Grégoire Layet]

Add pcie_kcs4 node to the LPC bus in the ast2600 g6 common dtsi.

The ASPEED AST2600 has a PCIe to LPC controller. It includes a KCS
interface on channel 4. This is a fully KCS-compatible interface
that is exposed over PCIe.

This can be used by the host for IPMI when the PCIe BMC Device is
activated.

While the datasheet provides interrupt numbers for KCS channels 1, 2,
3 and 4 over PCI, not all 4 are described in the "PCIe to LPC Controller"
section. Since only the KCS channel 4 is described, only this channel is
added.

The pcie_kcs4 uses existing "aspeed,ast2600-kcs-bmc" compatible as it's a
standard KCS interface.

Signed-off-by: Grégoire Layet <gregoire.layet at 9elements.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 56bb3b0444f7..a93fa4cf5d8f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -617,6 +617,13 @@ kcs4: kcs at 114 {
 					status = "disabled";
 				};
 
+				pcie_kcs4: kcs at 914 {
+					compatible = "aspeed,ast2600-kcs-bmc";
+					reg = <0x914 0x1>, <0x918 0x1>, <0x91c 0x1>;
+					interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
 				lpc_ctrl: lpc-ctrl at 80 {
 					compatible = "aspeed,ast2600-lpc-ctrl";
 					reg = <0x80 0x80>;
-- 
2.54.0