[PATCH v2 2/2] arm64: tegra: Drop CPU masks from GICv3 PPI interrupts

[Jon Hunter]

On 10/06/2026 16:09, Geert Uytterhoeven wrote:
> Unlike older GIC variants, the GICv3 DT bindings do not support
> specifying a CPU mask in PPI interrupt specifiers.  Drop the masks.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> ---
> v2:
>    - No changes.
> ---
>   arch/arm64/boot/dts/nvidia/tegra234.dtsi | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> index 04a95b6658caaa92..390609fee09c9da0 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> @@ -4083,7 +4083,7 @@ gic: interrupt-controller at f400000 {
>   			reg = <0x0 0x0f400000 0x0 0x010000>, /* GICD */
>   			      <0x0 0x0f440000 0x0 0x200000>; /* GICR */
>   			interrupt-parent = <&gic>;
> -			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>   
>   			#redistributor-regions = <1>;
>   			#interrupt-cells = <3>;
> @@ -5869,10 +5869,10 @@ tj-thermal {
>   
>   	timer {
>   		compatible = "arm,armv8-timer";
> -		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> -			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> -			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> -			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
>   		interrupt-parent = <&gic>;
>   		always-on;
>   	};


Reviewed-by: Jon Hunter <jonathanh at nvidia.com>
Tested-by: Jon Hunter <jonathanh at nvidia.com>

Thanks!
Jon

-- 
nvpublic