[PATCH v5 REPOST] remoteproc: imx_rproc: Invoke the callback directly

[Mathieu Poirier]

On Tue, Jul 21, 2026 at 04:09:06PM +0200, Sebastian Andrzej Siewior wrote:
> The imx-mailbox driver moved the callback invocation into the threaded
> IRQ handler. This means the callback is invoked in preemptible context
> and there is no need to schedule the kworker for the
> imx_rproc_notified_idr_cb() invocation.
> 
> This was tested with the rpmsg-tty driver on imx93.
> 
> Remove the workqueue handling and invoke the imx_rproc_notified_idr_cb()
> callback directly.
> 
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

Jassi - can you pick this up?

> ---
> This change was tested on a im93 board with rpmsg-tty driver.
> 
> v4…v5: https://lore.kernel.org/all/20260703-imx_mbox_rproc-v4-1-67b10560a861@linutronix.de/
>   - Repost
>
> v3…v4: https://lore.kernel.org/r/20260617-imx_mbox_rproc-v3-0-77948112defc@linutronix.de
>   - The mailbox bits are part of v7.2-rc1. This is just a repost of the
>     imx_rproc driver which is left.
>    
> v2…v3: https://lore.kernel.org/r/20260603-imx_mbox_rproc-v2-0-a0059dc3b69a@linutronix.de
>   - Forward the error in imx_mu_generic_tx() to the caller (new patch
>     #1)
>   - Extend the patch description a bit for for "Start splitting the IRQ
>     handler" to briefly explain why callbacks are moved to the threaded
>     handler.
>   - Drop imx_mu_con_priv::pending. The primary handler wakes its
>     threaded handler. Once the handler is woken, the pending flag must
>     be set and there is no need to set/ clear it.
>   - Avoid the double clk_disable_unprepare() if
>     devm_mbox_controller_register() fails.
> 
> v1…v2: https://lore.kernel.org/r/20260529-imx_mbox_rproc-v1-0-b8ffc36e11e5@linutronix.de
>   - Using correct register to enable RXDB event.
>   - Update commit description for the "threaded interrupt", "unmasks the
>     interrupt" => "masks the interrupt event".
>   - Add a shutdown field so that the interrupt does not unmask the
>     interrupt if it has been already disabled because the channel is
>     about to be shutdown.  A possible race mentioned by sashiko.
>   - Use devm_pm_runtime_enable(). This should avoid a possible race
>     sashiko mentioned.
>   - Use devm_of_platform_populate().
> ---
>  drivers/remoteproc/imx_rproc.c | 33 +--------------------------------
>  1 file changed, 1 insertion(+), 32 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 7662ebd9d2f49..e18ae33a5cf85 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -24,7 +24,6 @@
>  #include <linux/regmap.h>
>  #include <linux/remoteproc.h>
>  #include <linux/scmi_imx_protocol.h>
> -#include <linux/workqueue.h>
>  
>  #include "imx_rproc.h"
>  #include "remoteproc_internal.h"
> @@ -115,8 +114,6 @@ struct imx_rproc {
>  	struct mbox_client		cl;
>  	struct mbox_chan		*tx_ch;
>  	struct mbox_chan		*rx_ch;
> -	struct work_struct		rproc_work;
> -	struct workqueue_struct		*workqueue;
>  	void __iomem			*rsc_table;
>  	struct imx_sc_ipc		*ipc_handle;
>  	struct notifier_block		rproc_nb;
> @@ -892,21 +889,11 @@ static int imx_rproc_notified_idr_cb(int id, void *ptr, void *data)
>  	return 0;
>  }
>  
> -static void imx_rproc_vq_work(struct work_struct *work)
> -{
> -	struct imx_rproc *priv = container_of(work, struct imx_rproc,
> -					      rproc_work);
> -	struct rproc *rproc = priv->rproc;
> -
> -	idr_for_each(&rproc->notifyids, imx_rproc_notified_idr_cb, rproc);
> -}
> -
>  static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
>  {
>  	struct rproc *rproc = dev_get_drvdata(cl->dev);
> -	struct imx_rproc *priv = rproc->priv;
>  
> -	queue_work(priv->workqueue, &priv->rproc_work);
> +	idr_for_each(&rproc->notifyids, imx_rproc_notified_idr_cb, rproc);
>  }
>  
>  static int imx_rproc_xtr_mbox_init(struct rproc *rproc, bool tx_block)
> @@ -1271,13 +1258,6 @@ static int imx_rproc_sys_off_handler(struct sys_off_data *data)
>  	return NOTIFY_DONE;
>  }
>  
> -static void imx_rproc_destroy_workqueue(void *data)
> -{
> -	struct workqueue_struct *workqueue = data;
> -
> -	destroy_workqueue(workqueue);
> -}
> -
>  static int imx_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1305,17 +1285,6 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  		priv->ops = dcfg->ops;
>  
>  	dev_set_drvdata(dev, rproc);
> -	priv->workqueue = create_workqueue(dev_name(dev));
> -	if (!priv->workqueue) {
> -		dev_err(dev, "cannot create workqueue\n");
> -		return -ENOMEM;
> -	}
> -
> -	ret = devm_add_action_or_reset(dev, imx_rproc_destroy_workqueue, priv->workqueue);
> -	if (ret)
> -		return dev_err_probe(dev, ret, "Failed to add devm destroy workqueue action\n");
> -
> -	INIT_WORK(&priv->rproc_work, imx_rproc_vq_work);
>  
>  	ret = imx_rproc_xtr_mbox_init(rproc, true);
>  	if (ret)
> 
> ---
> base-commit: b3f94b2b3f3e51ab880a51fc6510e1dafba654ed
> change-id: 20260529-imx_mbox_rproc-7d512f5a6f78
> 
> Best regards,
> -- 
> Sebastian Andrzej Siewior <bigeasy at linutronix.de>