[PATCH] arm64: entry: dedup SDEI event priority selection

[Mark Rutland]

On Sat, Jul 18, 2026 at 06:54:47PM +0000, Bradley Morgan wrote:
> __sdei_asm_handler open codes the same branch ladder four times to pick
> the normal or critical variant of a per CPU variable based on the SDEI
> event priority: when recording the active event, when selecting the
> SDEI stack, when selecting the shadow call stack, and when clearing the
> active-event record on exit.
> 
> Add a sdei_choose macro, using \@ local labels like the files existing
> macros, and replace the four open coded copies with it. This also drops
> the repeated reuse of the 1:/2:/3:/4: numeric labels in this handler.
> 
> No functional change intended.
> 
> Signed-off-by: Bradley Morgan <include at grrlz.net>
> ---
>  arch/arm64/kernel/entry.S | 39 +++++++++++++++++++--------------------
>  1 file changed, 19 insertions(+), 20 deletions(-)

Looking at the patch below, the result is far less readable, and this
has only saved a single line.

I don't think this is worthwhile; please leave this as-is.

Mark.

> 
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index e0db14e9c843..29ef4a0d28a8 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -916,6 +916,15 @@ NOKPROBE(call_on_irq_stack)
>  	b	.
>  .endm
>  
> +/* Set \dst using \op and the \normal or \critical sym, based on \prio */
> +.macro sdei_choose op:req, dst:req, prio:req, normal:req, critical:req, tmp:req
> +	cbnz	\prio, .Lcritical\@
> +	\op dst=\dst, sym=\normal, tmp=\tmp
> +	b	.Ldone\@
> +.Lcritical\@:	\op dst=\dst, sym=\critical, tmp=\tmp
> +.Ldone\@:
> +.endm
> +
>  #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
>  /*
>   * The regular SDEI entry point may have been unmapped along with the rest of
> @@ -997,32 +1006,24 @@ SYM_CODE_START(__sdei_asm_handler)
>  
>  	/* Store the registered-event for crash_smp_send_stop() */
>  	ldrb	w4, [x19, #SDEI_EVENT_PRIORITY]
> -	cbnz	w4, 1f
> -	adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6
> -	b	2f
> -1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
> -2:	str	x19, [x5]
> +	sdei_choose adr_this_cpu, x5, w4, sdei_active_normal_event, \
> +		    sdei_active_critical_event, x6
> +	str	x19, [x5]
>  
>  	/*
>  	 * entry.S may have been using sp as a scratch register, find whether
>  	 * this is a normal or critical event and switch to the appropriate
>  	 * stack for this CPU.
>  	 */
> -	cbnz	w4, 1f
> -	ldr_this_cpu dst=x5, sym=sdei_stack_normal_ptr, tmp=x6
> -	b	2f
> -1:	ldr_this_cpu dst=x5, sym=sdei_stack_critical_ptr, tmp=x6
> -2:	mov	x6, #SDEI_STACK_SIZE
> +	sdei_choose ldr_this_cpu, x5, w4, sdei_stack_normal_ptr, sdei_stack_critical_ptr, x6
> +	mov	x6, #SDEI_STACK_SIZE
>  	add	x5, x5, x6
>  	mov	sp, x5
>  
>  #ifdef CONFIG_SHADOW_CALL_STACK
>  	/* Use a separate shadow call stack for normal and critical events */
> -	cbnz	w4, 3f
> -	ldr_this_cpu dst=scs_sp, sym=sdei_shadow_call_stack_normal_ptr, tmp=x6
> -	b	4f
> -3:	ldr_this_cpu dst=scs_sp, sym=sdei_shadow_call_stack_critical_ptr, tmp=x6
> -4:
> +	sdei_choose ldr_this_cpu, scs_sp, w4, sdei_shadow_call_stack_normal_ptr, \
> +		    sdei_shadow_call_stack_critical_ptr, x6
>  #endif
>  
>  	/*
> @@ -1068,11 +1069,9 @@ SYM_CODE_START(__sdei_asm_handler)
>  
>  	/* Clear the registered-event seen by crash_smp_send_stop() */
>  	ldrb	w3, [x4, #SDEI_EVENT_PRIORITY]
> -	cbnz	w3, 1f
> -	adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6
> -	b	2f
> -1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
> -2:	str	xzr, [x5]
> +	sdei_choose adr_this_cpu, x5, w3, sdei_active_normal_event, \
> +		    sdei_active_critical_event, x6
> +	str	xzr, [x5]
>  
>  alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
>  	sdei_handler_exit exit_mode=x2
> -- 
> 2.53.0
> 
>