[PATCH v23 14/14] crypto: qce - Communicate the base physical address to the dmaengine

[Bartosz Golaszewski]

In order to communicate to the BAM DMA engine which address should be
used as a scratchpad for dummy writes related to BAM pipe locking,
fill out the dedicated BAM peripheral config structure and pass it to
the DMA driver using dmaengine_slave_config().

Reviewed-by: Manivannan Sadhasivam <mani at kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>
---
 drivers/crypto/qce/core.c |  6 ++++--
 drivers/crypto/qce/dma.c  | 13 +++++++++++++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
index 4031b4516d6519fc5024bbbcc439500a7b3314b2..50fdc8d808d0fe1d9d430ec601ab2ccf2ddf6e91 100644
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -246,6 +246,9 @@ static int qce_crypto_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	qce->base_phys = res->start;
+	qce->dma_size = resource_size(res);
+
 	ret = devm_qce_dma_request(qce);
 	if (ret)
 		return ret;
@@ -263,10 +266,9 @@ static int qce_crypto_probe(struct platform_device *pdev)
 	qce->async_req_enqueue = qce_async_request_enqueue;
 	qce->async_req_done = qce_async_request_done;
 
-	qce->dma_size = resource_size(res);
 	qce->base_dma = dma_map_resource(dev, res->start, qce->dma_size,
 					 DMA_BIDIRECTIONAL, 0);
-	qce->base_phys = res->start;
+
 	ret = dma_mapping_error(dev, qce->base_dma);
 	if (ret)
 		return ret;
diff --git a/drivers/crypto/qce/dma.c b/drivers/crypto/qce/dma.c
index 88d253d9147cfc9ed275653f7fd248538378194a..09699d96575b105e2feaee08fad2731792f77ea2 100644
--- a/drivers/crypto/qce/dma.c
+++ b/drivers/crypto/qce/dma.c
@@ -11,6 +11,7 @@
 
 #include "core.h"
 #include "dma.h"
+#include "regs-v5.h"
 
 #define QCE_IGNORE_BUF_SZ		(2 * QCE_BAM_BURST_SIZE)
 #define QCE_BAM_CMD_SGL_SIZE		128
@@ -116,8 +117,16 @@ static void qce_dma_terminate(void *data)
 
 int devm_qce_dma_request(struct qce_device *qce)
 {
+	struct bam_config peripheral_cfg = {
+		.lock_scratchpad_addr = (u32)qce->base_phys + REG_VERSION,
+	};
+	struct dma_slave_config cfg = {
+		.direction = DMA_MEM_TO_DEV,
+		.peripheral_config = &peripheral_cfg,
+	};
 	struct qce_dma_data *dma = &qce->dma;
 	struct device *dev = qce->dev;
+	int ret;
 
 	dma->result_buf = devm_kmalloc(dev, QCE_RESULT_BUF_SZ + QCE_IGNORE_BUF_SZ, GFP_KERNEL);
 	if (!dma->result_buf)
@@ -133,6 +142,10 @@ int devm_qce_dma_request(struct qce_device *qce)
 		return dev_err_probe(dev, PTR_ERR(dma->rxchan),
 				     "Failed to get RX DMA channel\n");
 
+	ret = dmaengine_slave_config(dma->rxchan, &cfg);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to configure the RX DMA channel\n");
+
 	dma->bam_txn = devm_kzalloc(dev, sizeof(*dma->bam_txn), GFP_KERNEL);
 	if (!dma->bam_txn)
 		return -ENOMEM;

-- 
2.47.3