[PATCH] arm64: dts: imx91-9x9-qsb: add CAN support overlay file

[Frank.Li at oss.nxp.com]

From: Frank Li <Frank.Li at nxp.com>


On Fri, 10 Jul 2026 18:12:20 +0800, haibo.chen at oss.nxp.com wrote:
> On the i.MX91 9x9 QSB, CAN1 and MICFIL share pins. A TMUX1574RSVR
> analog mux controls the routing: when SEL is driven high, CAN1 is
> selected; when SEL is driven low, MICFIL is selected. By default,
> SEL is kept low.
> 
> To enable CAN1, SEL must be driven high. This is done via the can_fun
> function defined in the pinctrl-gpiomux node. CAN1 uses the
> TJA1057GT/3 PHY.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: imx91-9x9-qsb: add CAN support overlay file
      commit: 356894c37aa1f8ab430cef5d69176123b0ec98b3

Best regards,
-- 
Frank Li <Frank.Li at nxp.com>