[PATCH v3 06/11] arm64: dts: lx2160a: transition to device-specific SerDes compatible strings

[Ioana Ciornei]

Align to the modern fsl,lynx-28g.yaml binding, where the SoC and SerDes
instance is present in the compatible string, to allow reliable per-lane
capability detection and per-lane customization of electrical properties.

The modern bindings are backward-incompatible with old kernels, due
to the consumer phandles being either in one form or in another, as
explained here:
https://lore.kernel.org/lkml/20250930140735.mvo3jii7wgmzh2bs@skbuf/

Also mark the serdes_1 node as disabled by default since any dts using
it enables it explicitly now.

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
Changes in v3:
- Split the enabling of serdes_1 into a separate patch
- Split the LX2162A changes to another patch
- Move the status property to be the last for serdes_3
- Move the changes to the new fsl-lx2160a-serdes.dtsi file

Changes in v2:
- Enable serdes_1 on all board DTs that has consumers for it.
- Use the proper name for serdes_3 in fsl-lx2162a.dtsi.
- Remove paragraph from commit message which mentioned some consumer
changes that are no longer needed nor part of the commit.
---
 .../dts/freescale/fsl-lx2160a-serdes.dtsi     | 150 +++++++++++++++++-
 1 file changed, 148 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi
index 307824eda6d6..d482920f4d17 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi
@@ -6,16 +6,162 @@
 // Copyright 2026 NXP
 
 &soc {
+	/* Note on the interpretation of SerDes lane numbering from
+	 * LX2160ARM lane mappings for RCW[SRDS_PRTCL_S1]:
+	 * The letters (A-H) correspond to logical lane numbers in the
+	 * SerDes register map (lane A's registers start with LNAGCR0),
+	 * while the numbers (0-7) correspond to physical lanes as
+	 * routed to pins.  SerDes block #1 is flipped in the LX2160A
+	 * floorplan (logical lane A goes to physical lane 7's pins),
+	 * while SerDes blocks #2 and #3 are not.  The lanes below are
+	 * listed right to left when looking at that table.
+	 * Both the numbers and the letters are according to the logical
+	 * numbering scheme, and do not account for the flipping.
+	 */
 	serdes_1: phy at 1ea0000 {
-		compatible = "fsl,lynx-28g";
+		compatible = "fsl,lx2160a-serdes1", "fsl,lynx-28g";
 		reg = <0x0 0x1ea0000 0x0 0x1e30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		#phy-cells = <1>;
+		status = "disabled";
+
+		serdes_1_lane_a: phy at 0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_b: phy at 1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_c: phy at 2 {
+			reg = <2>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_d: phy at 3 {
+			reg = <3>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_e: phy at 4 {
+			reg = <4>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_f: phy at 5 {
+			reg = <5>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_g: phy at 6 {
+			reg = <6>;
+			#phy-cells = <0>;
+		};
+
+		serdes_1_lane_h: phy at 7 {
+			reg = <7>;
+			#phy-cells = <0>;
+		};
 	};
 
 	serdes_2: phy at 1eb0000 {
-		compatible = "fsl,lynx-28g";
+		compatible = "fsl,lx2160a-serdes2", "fsl,lynx-28g";
 		reg = <0x0 0x1eb0000 0x0 0x1e30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		#phy-cells = <1>;
 		status = "disabled";
+
+		serdes_2_lane_a: phy at 0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_b: phy at 1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_c: phy at 2 {
+			reg = <2>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_d: phy at 3 {
+			reg = <3>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_e: phy at 4 {
+			reg = <4>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_f: phy at 5 {
+			reg = <5>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_g: phy at 6 {
+			reg = <6>;
+			#phy-cells = <0>;
+		};
+
+		serdes_2_lane_h: phy at 7 {
+			reg = <7>;
+			#phy-cells = <0>;
+		};
+	};
+
+	serdes_3: phy at 1ec0000 {
+		compatible = "fsl,lx2160a-serdes3";
+		reg = <0x0 0x1ec0000 0x0 0x1e30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#phy-cells = <1>;
+		status = "disabled";
+
+		serdes_3_lane_a: phy at 0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_b: phy at 1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_c: phy at 2 {
+			reg = <2>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_d: phy at 3 {
+			reg = <3>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_e: phy at 4 {
+			reg = <4>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_f: phy at 5 {
+			reg = <5>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_g: phy at 6 {
+			reg = <6>;
+			#phy-cells = <0>;
+		};
+
+		serdes_3_lane_h: phy at 7 {
+			reg = <7>;
+			#phy-cells = <0>;
+		};
 	};
 };
-- 
2.25.1