[PATCH v3 00/11] arm64: dts: describe the Lynx 10G and 28G SerDes blocks for Layerscape SoCs

[Ioana Ciornei]

This patch set adds the device tree nodes for the Lynx10G SerDes blocks
found on the LS1028A, LS1046A, LS1088A and LS2088A SoCs.

The first 5 patches slowly change the LX2160A DTS support to a new
structure which does not use any delete-node or delete-property
directives. This is a direct result of the discussion with Frank in the
v2 of this set:
https://lore.kernel.org/all/akwAmzAbtg0Ejey0@SMW015318/

Patches 5 and 6 transition the LX2160A and LX2162 SoC dtsi to use the
device-specific Lynx28G SerDes compatible while the remainder of the set
adds the SerDes block descriptions for the LS1028A, LS1046A, LS2088A and
LS1088A SoCs.

Changes in v3:
- Changes how the LX216XA based SoC dtsi files are structured.
- Split the enabling of serdes_1 into a separate patch
- Split the LX2162A changes to another patch
- Move the status property to be the last for serdes_3
- Move the changes to the new fsl-lx2160a-serdes.dtsi file

Changes in v2:
- Enable serdes_1 on all board DTs that has consumers for it.
- Use the proper name for serdes_3 in fsl-lx2162a.dtsi.
- Remove paragraph from commit message which mentioned some consumer
changes that are no longer needed nor part of the commit.
- Change the size of the SerDes region to 0x2000

Ioana Ciornei (8):
  arm64: dts: lx2160a: explicitly enable serdes_1 node
  arm64: dts: lx2160a: extract the PCIe nodes into a separate dtsi
  arm64: dts: lx2160a: extract the SerDes nodes into a separate dtsi
  arm64: dts: lx2160a: extract the PCIe from LX2160A Rev2 into a
    separate file
  arm64: dts: lx2160a: split the dtsi to avoid delete-property
  arm64: dts: lx2160a: transition to device-specific SerDes compatible
    strings
  arm64: dts: lx2162a: transition to device-specific SerDes compatible
    strings
  arm64: dts: ls1088a: describe the Lynx 10G SerDes blocks

Vladimir Oltean (3):
  arm64: dts: ls1028a: describe the Lynx 10G SerDes
  arm64: dts: ls1046a: describe the Lynx 10G SerDes blocks
  arm64: dts: ls208xa: describe the Lynx 10G SerDes blocks

 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |  29 ++
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi |  60 ++++
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  58 ++++
 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi |  98 +++++++
 .../dts/freescale/fsl-lx2160a-bluebox3.dts    |   2 +-
 .../dts/freescale/fsl-lx2160a-clearfog-cx.dts |   2 +-
 .../freescale/fsl-lx2160a-clearfog-itx.dtsi   |   4 +
 .../dts/freescale/fsl-lx2160a-half-twins.dts  |   4 +
 .../dts/freescale/fsl-lx2160a-honeycomb.dts   |   2 +-
 .../dts/freescale/fsl-lx2160a-pcie-mbvl.dtsi  | 176 ++++++++++++
 .../boot/dts/freescale/fsl-lx2160a-rdb.dts    |   4 +
 .../boot/dts/freescale/fsl-lx2160a-rev1.dtsi  |   9 +
 .../boot/dts/freescale/fsl-lx2160a-rev2.dtsi  | 188 +------------
 .../dts/freescale/fsl-lx2160a-serdes.dtsi     | 167 ++++++++++++
 .../dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi |   2 +-
 .../dts/freescale/fsl-lx2162a-clearfog.dts    |   6 +-
 .../boot/dts/freescale/fsl-lx2162a-qds.dts    |   2 +-
 .../dts/freescale/fsl-lx2162a-serdes.dtsi     |  86 ++++++
 .../arm64/boot/dts/freescale/fsl-lx2162a.dtsi |   9 +
 .../{fsl-lx2160a.dtsi => fsl-lx216x.dtsi}     | 181 ------------
 .../dts/freescale/fsl-lx216xa-pcie-gen3.dtsi  | 257 ++++++++++++++++++
 21 files changed, 974 insertions(+), 372 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-pcie-mbvl.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rev1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-serdes.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a.dtsi
 rename arch/arm64/boot/dts/freescale/{fsl-lx2160a.dtsi => fsl-lx216x.dtsi} (86%)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx216xa-pcie-gen3.dtsi

-- 
2.25.1