[PATCH 2/2] spi: axiado: fix kernel-doc comments

[Tzu-Hao Wei]

On 7/13/2026 2:08 PM, Babanpreet Singh wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> 
> Running kernel-doc -Wall on the driver reports 7 warnings, all present
> since the driver was added in commit e75a6b00ad79 ("spi: axiado: Add
> driver for Axiado SPI DB controller"). Two are in spi-axiado.c and
> also show up in W=1 builds of drivers/spi:
> 
>   Warning: drivers/spi/spi-axiado.c:226 expecting prototype for
>   ax_spi_get_rx_byte(). Prototype was for ax_spi_get_rx_byte_for_irq()
>   instead
>   Warning: drivers/spi/spi-axiado.c:248 This comment starts with
>   '/**', but isn't a kernel-doc comment. Refer to
>   Documentation/doc-guide/kernel-doc.rst
> 
> The other five are for struct ax_spi in spi-axiado.h, seen when
> kernel-doc is invoked on the header directly (headers are not scanned
> by the build-time kernel-doc checks):
> 
>   Warning: drivers/spi/spi-axiado.h:130 Excess struct member 'rxbuf'
>   description in 'ax_spi'
>   Warning: drivers/spi/spi-axiado.h:130 Excess struct member 'txbuf'
>   description in 'ax_spi'
>   Warning: drivers/spi/spi-axiado.h:130 struct member 'clk_rate' not
>   described in 'ax_spi'
>   Warning: drivers/spi/spi-axiado.h:130 struct member 'rx_buf' not
>   described in 'ax_spi'
>   Warning: drivers/spi/spi-axiado.h:130 struct member 'tx_buf' not
>   described in 'ax_spi'
> 
> Fix the three underlying defects:
> 
>  - The comment on ax_spi_get_rx_byte_for_irq() carries the name of
>    ax_spi_get_rx_byte(), from which it was evidently copied when the
>    IRQ variant was split out; fix the function name.
> 
>  - The comment on ax_spi_process_rx_and_finalize() is opened with the
>    kernel-doc /** marker but has no identifier line; turn it into
>    proper kernel-doc (identifier line, @ctlr, Return:) since it
>    already describes the behavior and the return value.
> 
>  - The struct ax_spi comment documents @txbuf and @rxbuf while the
>    members are named tx_buf and rx_buf, and does not document
>    clk_rate; fix the member names and describe clk_rate.
> 
> No functional change.
> 
> Assisted-by: Claude:claude-fable-5 [kernel-doc]
> Signed-off-by: Babanpreet Singh <bbnpreetsingh at gmail.com>
> ---
>  drivers/spi/spi-axiado.c | 8 ++++++--
>  drivers/spi/spi-axiado.h | 5 +++--
>  2 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-axiado.c b/drivers/spi/spi-axiado.c
> index c4bc7a50d6c9..25561aa9f76f 100644
> --- a/drivers/spi/spi-axiado.c
> +++ b/drivers/spi/spi-axiado.c
> @@ -213,7 +213,7 @@ static void ax_spi_fill_tx_fifo(struct ax_spi *xspi)
>  }
> 
>  /**
> - * ax_spi_get_rx_byte - Gets a byte from the RX FIFO buffer
> + * ax_spi_get_rx_byte_for_irq - Gets a byte from the RX FIFO buffer
>   * @xspi: Controller private data (struct ax_spi *)
>   *
>   * This function handles the logic of extracting bytes from the 32-bit RX FIFO.
> @@ -246,9 +246,13 @@ static u8 ax_spi_get_rx_byte_for_irq(struct ax_spi *xspi)
>  }
> 
>  /**
> + * ax_spi_process_rx_and_finalize - Process RX bytes and check for completion
> + * @ctlr:      Pointer to spi_controller structure
> + *
>   * Helper function to process received bytes and check for transfer completion.
>   * This avoids code duplication and centralizes the completion logic.
> - * Returns true if the transfer was finalized.
> + *
> + * Return: true if the transfer was finalized.
>   */
>  static bool ax_spi_process_rx_and_finalize(struct spi_controller *ctlr)
>  {
> diff --git a/drivers/spi/spi-axiado.h b/drivers/spi/spi-axiado.h
> index 6cf0e5bf5879..d24d31c3a446 100644
> --- a/drivers/spi/spi-axiado.h
> +++ b/drivers/spi/spi-axiado.h
> @@ -98,9 +98,10 @@
>   * @regs:                                      Virtual address of the SPI controller registers
>   * @ref_clk:                                   Pointer to the peripheral clock
>   * @pclk:                                      Pointer to the APB clock
> + * @clk_rate:                                  Reference clock rate in Hz
>   * @speed_hz:                                  Current SPI bus clock speed in Hz
> - * @txbuf:                                     Pointer to the TX buffer
> - * @rxbuf:                                     Pointer to the RX buffer
> + * @tx_buf:                                    Pointer to the TX buffer
> + * @rx_buf:                                    Pointer to the RX buffer
>   * @tx_bytes:                                  Number of bytes left to transfer
>   * @rx_bytes:                                  Number of bytes requested
>   * @tx_fifo_depth:                             Depth of the TX FIFO
> --
> 2.43.0
> 
Thanks!
Acked-By: Tzu-Hao Wei <twei at axiado.com>