[PATCH v3 3/7] gpio: regmap: Add gpio_regmap_operation and write-enable support

[Andy Shevchenko]

On Thu, Jul 16, 2026 at 02:26:14PM +0800, Yu-Chun Lin wrote:

...

> >> > -     ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
> >> > +     ret = gpio->reg_mask_xlate(gpio, GPIO_REGMAP_SET_DIR_OP, base,
> >> offset, &reg, &mask);
> >> > +     if (ret)
> >> > +             return ret;
> >> > +
> >> > +     ret = gpio->reg_mask_xlate(gpio, GPIO_REGMAP_SET_DIR_WREN_OP,
> >> base, offset, &reg,
> >> > +                                &wren_mask);
> >> 
> >> What constrains these two to provide the same value back for reg?
> >> To me it seems like the write enable might well be in a different register.
> >> 
> >> >       if (ret)
> >> >               return ret;

...

> >> > -     return regmap_update_bits(gpio->regmap, reg, mask, val);
> >> > +     return regmap_update_bits(gpio->regmap, reg, mask | wren_mask,
> >> > + val | wren_mask);
> >> >  }
> >> >
> >> >  static int gpio_regmap_direction_input(struct gpio_chip *chip,
> >
> > My initial design indeed assumed that the WREN mask and Data mask reside in
> > the same register.
> >  
> > Regarding WREN support, especially if WREN and Data use separate registers, I
> > came up with three ideas. Which direction do you prefer?
> >  
> > Approach 1: Provide Custom Callbacks in config (Let consumer driver handle it)
> > We can add '.set' and '.set_direction' function pointers in
> > 'struct gpio_regmap_config'. If a driver requires WREN, it can implement these
> > callbacks itself.
> > 
> > static void gpio_regmap_set(struct gpio_chip *chip, unsigned int offset, int val)
> > {
> >         struct gpio_regmap *gpio = gpiochip_get_data(chip);
> >  
> >         /* If the driver provides a custom set (to handle WREN), delegate to it */
> >         if (gpio->set) {
> >                 gpio->set(chip, offset, val);
> >                 return;
> >         }
> >         /* ... existing generic regmap logic ... */
> > }
> >
> > Pros: Clean core, no need to touch existing drivers' xlate signature. The consumer
> > driver handles its own locking for different registers.
> > Cons: It feels a bit strange and inconsistent to expose only '.set' and
> > '.set_direction' overrides while keeping other operations entirely abstracted.
> >  
> > Approach 2: Handle separate WREN register in the core (with locking concerns)
> > We keep the 'XX_WREN_OP' in 'xlate'. If someone needs WREN and 'wren_reg != reg',
> > we write to both.
> >  
> > static int gpio_regmap_set(struct gpio_chip *chip, unsigned int offset,
> >                            int val)
> > {
> >         /* skip */
> >         ret = gpio->reg_mask_xlate(gpio, GPIO_REGMAP_SET_WREN_OP, base, offset, &wren_reg,
> >                                    &wren_mask);
> >         if (ret == -ENOTSUPP)
> >                 has_wren = false;
> >         else if (ret)
> >                 return ret;
> > 
> >        ret = gpio->reg_mask_xlate(gpio, GPIO_REGMAP_SET_OP, base, offset, &reg, &mask);
> > 
> >        if (has_wren && reg == wren_reg) {
> >                mask |= wren_mask;
> >                mask_val |= wren_mask;
> >                has_wren = false;
> >        }
> > 
> >        if (has_wren)
> >                ret = regmap_set_bits(gpio->regmap, wren_reg, wren_mask); 
> > 
> >         /* ignore input values which shadow the old output value */
> >         if (gpio->reg_dat_base == gpio->reg_set_base)
> >                 ret = regmap_write_bits(gpio->regmap, reg, mask, mask_val);
> >         else
> >                 ret = regmap_update_bits(gpio->regmap, reg, mask, mask_val);
> >  
> >         return ret;
> > }
> >  
> > Pros: Keeps all WREN logic unified inside the core framework.
> > Cons: Introduces a locking issue. writing to 'wren_reg' and then 'reg' requires an
> > external lock to be atomic, which seems to defeat the purpose of relying on regmap's
> > internal lock. 
> > 
> > Approach 3: Assume WREN and Data always share the same register
> > 
> > static int gpio_regmap_set(struct gpio_chip *chip, unsigned int offset, int val)
> > {
> >         /* ... */
> >         ret = gpio->reg_mask_xlate(gpio, GPIO_REGMAP_SET_WREN_OP, base, offset, &reg, &wren_mask);
> >         if (ret == -ENOTSUPP)
> >                 wren_mask = 0;
> >         else if (ret)
> >                 return ret;
> >  
> >         ret = gpio->reg_mask_xlate(gpio, GPIO_REGMAP_SET_OP, base, offset, &reg, &mask);
> >  
> >         ret = regmap_update_bits(gpio->regmap, reg, mask | wren_mask, mask_val | wren_mask);
> >         return ret;
> > }
> >  
> > Regarding this approach, I would like to ask from your experience: Is it
> > actually common for hardware designs to place WREN and Data bits in completely
> > different registers for GPIO operations?
> > 
> > If they practically always share the same register, this simpler approach might
> > suffice.
> 
> If there are no further concerns, I will proceed with the third approach and
> send out v6.

>From the above list I tend to the approach 2, but this might require to have
GPIO regmap level of locking. I'm a bit lost in the context, though. I assume
we need a fresh start, id est issue a v6 with approach 2 or 3 in place and
summarize the choices in the cover letter, so we can understand what has been
considered.

-- 
With Best Regards,
Andy Shevchenko