[PATCH] PCI: xilinx: use fwnode_irq_get() for INTx IRQ lookup
Pandey, Radhey Shyam
radheys at amd.com
Wed Jul 15 05:54:33 PDT 2026
> Replace irq_of_parse_and_map() with fwnode_irq_get(dev_fwnode(dev), 0)
> in xilinx_pcie_parse_dt(). For an OF-backed device this is equivalent to
> the previous call, but uses the generic firmware-node API.
>
> Unlike irq_of_parse_and_map(), fwnode_irq_get() returns a positive IRQ or
> a negative errno and never 0 (it rewrites 0 to -EINVAL). Store the result
> in an int and check for irq < 0, returning the error (including
> -EPROBE_DEFER). This also adds the error handling the previous code
> lacked, where irq_of_parse_and_map() failures were passed straight into
> devm_request_irq().
>
> Built for ARM (multi_v7_defconfig + CONFIG_PCIE_XILINX) with LLVM=1;
> drivers/pci/controller/pcie-xilinx.o compiles cleanly.
>
> Assisted-by: opencode:hy3-free
> Signed-off-by: Rosen Penev <rosenp at gmail.com>
> ---
> drivers/pci/controller/pcie-xilinx.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c
> index 4aa139abac16..a7b069f7673a 100644
> --- a/drivers/pci/controller/pcie-xilinx.c
> +++ b/drivers/pci/controller/pcie-xilinx.c
> @@ -20,10 +20,10 @@
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> #include <linux/of_platform.h>
> -#include <linux/of_irq.h>
> #include <linux/pci.h>
> #include <linux/pci-ecam.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
>
> #include "../pci.h"
>
> @@ -535,7 +535,7 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie *pcie)
> struct device *dev = pcie->dev;
> struct device_node *node = dev->of_node;
> struct resource regs;
> - unsigned int irq;
> + int irq;
> int err;
>
> err = of_address_to_resource(node, 0, ®s);
> @@ -548,7 +548,10 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie *pcie)
> if (IS_ERR(pcie->reg_base))
> return PTR_ERR(pcie->reg_base);
>
> - irq = irq_of_parse_and_map(node, 0);
> + irq = fwnode_irq_get(dev_fwnode(dev), 0);
> + if (irq < 0)
> + return irq;
>
Thanks for the patch.
Nit - as Sashiko review mentioned better to update xilinx_pcie_probe()
to use dev_err_probe() to avoid noise on defer.
Rest changes looks fine.
Thanks,
Radhey> err = devm_request_irq(dev, irq, xilinx_pcie_intr_handler,
> IRQF_SHARED | IRQF_NO_THREAD,
> "xilinx-pcie", pcie);
More information about the linux-arm-kernel
mailing list