[PATCH 6/7] dt-bindings: mailbox: goog-mba: Add goog-mba mailbox bindings

[Krzysztof Kozlowski]

On 15/07/2026 00:21, Douglas Anderson wrote:
> Introduce bindings for the MailBox Array IP block present in Laguna
> SoCs (AKA "lga", AKA "Google Tensor G5").
> 
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> ---
> 
>  .../bindings/mailbox/google,mba.yaml          | 216 ++++++++++++++++++

Filename must match compatible.

>  1 file changed, 216 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/google,mba.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/google,mba.yaml b/Documentation/devicetree/bindings/mailbox/google,mba.yaml
> new file mode 100644
> index 000000000000..6c4505a369e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/google,mba.yaml
> @@ -0,0 +1,216 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2025 Google LLC
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/google,mba.yaml#
> +$schema: http://devicetree.org/meta-schemas/base.yaml#
> +
> +title: Google MailBox Array
> +
> +maintainers:
> +  - Douglas Anderson <dianders at chromium.org>
> +
> +description: |
> +  The Google MailBox Array (MBA) is an IP block in Google-designed SoCs
> +  starting in Laguna (AKA "lga", AKA Google Tensor G5). In a typical SoC
> +  that includes this IP block, there are a number of instances of the MBA
> +  controller with each instance having slightly different hardware
> +  parameters and intended for communication with a different remote
> +  processor.
> +
> +  An MBA instance has a "host" that is defined as the processor "providing"
> +  a "service". This is typically not the main Application Processor (AP) but
> +  is instead some specialized co-processor in the SoC like the Central Power
> +  Manager (CPM). A processor (like the AP) talking to the "host" of the MBA
> +  is a "client" of the MBA. A given MBA instance only ever has one host, but
> +  it may have several clients. For instance, the CPM (an MBA "host") may need
> +  to send/receive mailbox messages not just from the AP but from other
> +  processors in the SoC and each of these other processors can be "clients"
> +  of the same MBA.
> +
> +  The "host" of an MBA instance has full access to everything in the MBA
> +  instance. It can access its own private set of "host" MBA registers, the
> +  "global" MBA registers (if they exist), and all of the "client" MBA
> +  registers.
> +
> +  A "client" of an MBA instance has access to the "global" MBA registers (if
> +  they exist) and one or more sets of "client" MBA registers.
> +
> +  These bindings are focused on describing the MBA from the point of view of
> +  a single client.
> +
> +  As per above, a client may have access to several sets of MBA "client"
> +  registers. Each set of "client" registers represents a logical mailbox
> +  "channel". However, because each channel may have different configuration
> +  parameters and a mailbox "channel" in typical usage means one of a number
> +  of identical channels, each channel in a Google MailBox Array is typically
> +  referred to as a full "mailbox" and the whole collection of mailboxes as
> +  the "mailbox array".
> +
> +  Mailboxes in an MBA instance have these features:
> +  * 1 to 256 32-bit words of shared memory.
> +  * The ability for the client to ring the main doorbell of the host and be
> +    notified when the host Acks the doorbell.
> +  * The ability for the host to ring the main doorbell of the client and be
> +    notified when the client Acks the doorbell.
> +
> +  Some mailboxes may also have the ability to have counted doorbells. This
> +  means that the receiver of the doorbell can tell how many times it rung.
> +  This is intended for implementing "queued" mailboxes. See below.
> +
> +  The MBA hardware doesn't have any specific directionality. That is to
> +  say, both the host and the client have full read and write access to
> +  their shared memory. All mailbox instances have doorbells going both from
> +  the client to the host as well as the host to the client.
> +
> +  The mailboxes can only be used for communication if the host and client
> +  both agree on conventions. These conventions are described in the
> +  device tree as they describe how the remote firmware is expecting to
> +  communicate.
> +
> +  Current known in-use conventions:
> +  1. An RX mailbox with payloads that are of a well-defined size.
> +     On mailboxes of this type, the host is the only one to write shared
> +     memory. After placing a fixed-size message in shared memory, it rings
> +     the main doorbell of the client. The client reads the message and Acks
> +     the doorbell.
> +  2. A TX mailbox with payloads that could vary in size.
> +     On mailboxes of this type, the mailbox client is the only one to write
> +     shared memory. The client always writes a payload to the start of shared
> +     memory and rings the main host doorbell. The client then looks for the
> +     host to Ack the doorbell. The clients of the mailbox have ways to know
> +     the size of any given message.
> +  3. A half-duplex TX/RX mailbox. This is a mailbox that can switch between
> +     convention #1 and #2 above. Since both sides write data to the start of
> +     shared memory, the two sides must have some convention to know whose
> +     turn it is to send a message.
> +  4. A "queued" RX mailbox with a payload of a well-defined size.
> +     This type of mailbox is only possible if the MBA instance can count
> +     doorbells. On mailboxes of this type, the host is the only one to write
> +     shared memory. When the client doorbell rings, the client reads a
> +     fixed-size from the next "slot" in shared memory and then updates its
> +     internal state. The shared memory is treated as a circular queue.
> +  5. A "queued" TX mailbox with a payload of a well-defined size.
> +     This type of mailbox is only possible if the MBA instance can count
> +     doorbells. On mailboxes of this type, the mailbox client is the only one
> +     to write shared memory. The shared memory is treated as a circular queue.
> +     The client writes a fixed-sized payload to the next "slot" in the shared
> +     memory (where the slot size is determined by the client's first transfer),
> +     updates its internal state, and rings the host doorbell. The client can
> +     keep writing more messages as long as the circular queue isn't full. The
> +     client gets an interrupt when the host Acks a doorbell and can tell how
> +     many doorbells still haven't been Acked.
> +
> +  Conventions will be supported with a small number of properties specified
> +  for each mailbox.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - google,lga-mailbox-array
> +      - const: google,mailbox-array

Don't use generic fallback. Just the SoCs.


> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: Host registers (not accessible to client)
> +      - description: Global registers (not present on newer IP blocks)

You have only one SoC. One SoC has only one IP block, no?

> +
> +  ranges: true
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +patternProperties:
> +  "^mailbox@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Each sub-node is a single-channel mailbox.

This does not look like correct representation. You have one mailbox
controller with multiple mailboxes, not multiple mailbox controllers of
single channel boxes.


> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +
> +      interrupts:
> +        maxItems: 1
> +
> +      "#mbox-cells":
> +        const: 0
> +
> +      google,rx-payload-words:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        maximum: 256
> +        default: 0
> +        description:
> +          The number of 32-bit words in each mailbox message from the remote
> +          processor. May be 0 for doorbell-only. If not specified this is
> +          assumed to be 0.
> +
> +      google,mba-queue-mode:
> +        type: boolean
> +        description:
> +          The remote processor is expecting the shared memory to be treated
> +          as a circular queue and that there may be several outstanding
> +          messages at once. Only usable on instances with counted doorbell
> +          interrupts.
> +
> +    required:
> +      - reg
> +      - interrupts
> +      - "#mbox-cells"
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - ranges
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      cpm_ap_ns_mba: mailbox-array at 5240000 {

Drop all unused labels.


Best regards,
Krzysztof