[PATCH v2 1/3] ARM: dts: marvell: armada: Correct indentation

Gregory CLEMENT gregory.clement at bootlin.com
Mon Jul 13 08:52:01 PDT 2026


Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com> writes:

> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
> ---
>  arch/arm/boot/dts/marvell/armada-370.dtsi  |  8 ++++----
>  arch/arm/boot/dts/marvell/armada-xp-gp.dts | 14 +++++++-------
>  2 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
> index 2013a5ccecd3..cf73287501da 100644
> --- a/arch/arm/boot/dts/marvell/armada-370.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
> @@ -63,8 +63,8 @@ pcie0: pcie at 1,0 {
>  				interrupt-names = "intx";
>  				interrupts-extended = <&mpic 58>;
>  				#interrupt-cells = <1>;
> -                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> -                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
> +				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> +					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
>  				bus-range = <0x00 0xff>;
>  				interrupt-map-mask = <0 0 0 7>;
>  				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
> @@ -91,8 +91,8 @@ pcie2: pcie at 2,0 {
>  				interrupt-names = "intx";
>  				interrupts-extended = <&mpic 62>;
>  				#interrupt-cells = <1>;
> -                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> -                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
> +				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> +					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
>  				bus-range = <0x00 0xff>;
>  				interrupt-map-mask = <0 0 0 7>;
>  				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
> diff --git a/arch/arm/boot/dts/marvell/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> index d1d348b91c0a..65cc0373fe04 100644
> --- a/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> +++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> @@ -34,13 +34,13 @@ chosen {
>  	memory at 0 {
>  		device_type = "memory";
>  		/*
> -                 * 8 GB of plug-in RAM modules by default.The amount
> -                 * of memory available can be changed by the
> -                 * bootloader according the size of the module
> -                 * actually plugged. However, memory between
> -                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
> -                 * the address range used for I/O (internal registers,
> -                 * MBus windows).
> +		 * 8 GB of plug-in RAM modules by default.The amount
> +		 * of memory available can be changed by the
> +		 * bootloader according the size of the module
> +		 * actually plugged. However, memory between
> +		 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
> +		 * the address range used for I/O (internal registers,
> +		 * MBus windows).
>  		 */
>  		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
>  		      <0x00000001 0x00000000 0x00000001 0x00000000>;
> -- 
> 2.53.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



More information about the linux-arm-kernel mailing list