[PATCH 7/8] ARM: dts: mstar: sbc2d06: Add regulators

[Daniel Palmer]

From: Daniel Palmer <daniel at 0x0f.com>

Add the board's fixed regulators.

Signed-off-by: Daniel Palmer <daniel at 0x0f.com>
---
 ...-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
index b15c40762bc0..8dbff5e53e5f 100644
--- a/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
@@ -20,4 +20,21 @@ sys_led {
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vcc_vbus: regulator-vcc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio SSD20XD_GPIO_GPIO14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sd: regulator-vcc-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio SSD20XD_GPIO_GPIO90 GPIO_ACTIVE_HIGH>;
+	};
 };
-- 
2.53.0