[PATCH v2 3/3] ASoC: xilinx: xlnx_spdif: Use dev_err_probe() and drop redundant error handling

[phucduc.bui at gmail.com]

From: bui duc phuc <phucduc.bui at gmail.com>

Use dev_err_probe() for probe error handling where appropriate to
simplify the code and properly handle deferred probe.
Also remove redundant error messages when the called helper already
reports failures, returning the error directly to avoid duplicate
logging.

Signed-off-by: bui duc phuc <phucduc.bui at gmail.com>
---

Changes in v2:
 - Adjust line wrapping.


 sound/soc/xilinx/xlnx_spdif.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/sound/soc/xilinx/xlnx_spdif.c b/sound/soc/xilinx/xlnx_spdif.c
index deb7225c1b4b..ae05818ba064 100644
--- a/sound/soc/xilinx/xlnx_spdif.c
+++ b/sound/soc/xilinx/xlnx_spdif.c
@@ -249,21 +249,18 @@ static int xlnx_spdif_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ctx->axi_clk = devm_clk_get_enabled(dev, "s_axi_aclk");
-	if (IS_ERR(ctx->axi_clk)) {
-		ret = PTR_ERR(ctx->axi_clk);
-		dev_err(dev, "failed to get s_axi_aclk(%d)\n", ret);
-		return ret;
-	}
+	if (IS_ERR(ctx->axi_clk))
+		return dev_err_probe(dev, PTR_ERR(ctx->axi_clk),
+				     "failed to get s_axi_aclk\n");
 
 	ctx->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ctx->base))
 		return PTR_ERR(ctx->base);
 
 	ret = of_property_read_u32(node, "xlnx,spdif-mode", &ctx->mode);
-	if (ret < 0) {
-		dev_err(dev, "cannot get SPDIF mode\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "cannot get SPDIF mode\n");
+
 	if (ctx->mode) {
 		dai_drv = &xlnx_spdif_tx_dai;
 	} else {
@@ -282,19 +279,15 @@ static int xlnx_spdif_probe(struct platform_device *pdev)
 	}
 
 	ret = of_property_read_u32(node, "xlnx,aud_clk_i", &ctx->aclk);
-	if (ret < 0) {
-		dev_err(dev, "cannot get aud_clk_i value\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "cannot get aud_clk_i value\n");
 
 	dev_set_drvdata(dev, ctx);
 
 	ret = devm_snd_soc_register_component(dev, &xlnx_spdif_component,
 					      dai_drv, 1);
-	if (ret) {
-		dev_err(dev, "SPDIF component registration failed\n");
+	if (ret)
 		return ret;
-	}
 
 	writel(XSPDIF_SOFT_RESET_VALUE, ctx->base + XSPDIF_SOFT_RESET_REG);
 	dev_info(dev, "%s DAI registered\n", dai_drv->name);
-- 
2.43.0