[PATCH 3/3] ARM: dts: ixp4xx: Drop the reg-offset hack

[Linus Walleij]

The reg-offset hack only works when the IXP4xx platform is
running in big endian mode, and it is there to byte-offset
the byte where the serial registers appear in the BE config.

This is clearly wrong, workarounds need to be in the
drivers. Drop the reg-offset.

Signed-off-by: Linus Walleij <linusw at kernel.org>
---
 arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
index 0adeccabd4fe..b0f98da8def4 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
@@ -84,11 +84,6 @@ pci at c0000000 {
 		uart0: serial at c8000000 {
 			compatible = "intel,xscale-uart";
 			reg = <0xc8000000 0x1000>;
-			/*
-			 * The reg-offset and reg-shift is a side effect
-			 * of running the platform in big endian mode.
-			 */
-			reg-offset = <3>;
 			reg-shift = <2>;
 			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <14745600>;
@@ -98,11 +93,6 @@ uart0: serial at c8000000 {
 		uart1: serial at c8001000 {
 			compatible = "intel,xscale-uart";
 			reg = <0xc8001000 0x1000>;
-			/*
-			 * The reg-offset and reg-shift is a side effect
-			 * of running the platform in big endian mode.
-			 */
-			reg-offset = <3>;
 			reg-shift = <2>;
 			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <14745600>;

-- 
2.55.0