[PATCH 1/4] ARM: dts: imx6dl-plym2m: change #io-channel-cells to 1 of voltage divider

[Frank.Li at oss.nxp.com]

From: Frank Li <Frank.Li at nxp.com>

Change #io-channel-cells to 1 of voltage divider to fix below CHENCK_DTBS
warnings:
  arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dtb: voltage-divider-vaccu (voltage-divider): #io-channel-cells: 1 was expected
        from schema $id: http://devicetree.org/schemas/iio/afe/voltage-divider.yaml

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
index fbff77944ce32..635c5a1e1fc7c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
@@ -52,7 +52,7 @@ display_out: endpoint {
 
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&vdiv_vaccu>;
+		io-channels = <&vdiv_vaccu 0>;
 	};
 
 	leds {
@@ -187,7 +187,7 @@ vdiv_vaccu: voltage-divider-vaccu {
 		io-channels = <&adc_ts 2>;
 		output-ohms = <2500>;
 		full-ohms = <64000>;
-		#io-channel-cells = <0>;
+		#io-channel-cells = <1>;
 	};
 };
 

-- 
2.43.0