[PATCH 2/2] ARM: dts: imx53-ard: change node name eim-cs1 to eim-cs1-bus

[Frank.Li at oss.nxp.com]

From: Frank Li <Frank.Li at nxp.com>

Change node name eim-cs1 to eim-cs1-bus to fix below CHECK_DTS warnings:

arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: eim-cs1 at f4000000 (fsl,eim-bus): $nodename:0: 'eim-cs1 at f4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
        from schema $id: http://devicetree.org/schemas/simple-bus.yaml

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx53-ard.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
index e580427660b1d..c19ac3bb0a197 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
@@ -17,7 +17,7 @@ memory at 70000000 {
 		reg = <0x70000000 0x40000000>;
 	};
 
-	eim-cs1 at f4000000 {
+	eim-bus at f4000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,eim-bus", "simple-bus";

-- 
2.43.0