[PATCH 2/2] ARM: dts: ls1021a-iot: rename display at 0 to display0

[Frank.Li at oss.nxp.com]

From: Frank Li <Frank.Li at nxp.com>

Rename node name display at 0 to display0 since no reg under it. Rename mode0
to timing0.

Fix below CHECK_DTBS warnings:

arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: dcu at 2ce0000 (fsl,ls1021a-dcu): 'display', 'display at 0' do not match any of the regexes: '^pinctrl-[0-9]+$'
        from schema $id: http://devicetree.org/schemas/display/fsl,ls1021a-dcu.yaml
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: display-timings: 'mode0' does not match any of the regexes: '^pinctrl-[0-9]+$', '^timing'
        from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
index e13ccae629a71..07b01434fc047 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
@@ -82,13 +82,13 @@ &dcu {
 	display = <&display>;
 	status = "okay";
 
-	display: display at 0 {
+	display: display0 {
 		bits-per-pixel = <24>;
 
 		display-timings {
 			native-mode = <&timing0>;
 
-			timing0: mode0 {
+			timing0: timing0 {
 				clock-frequency = <25000000>;
 				hactive = <640>;
 				vactive = <480>;

-- 
2.43.0