[PATCH v3 09/15] drm/tidss: Add external data and sync signal edge configuration

[Devarsh Thakkar]

On 29/05/26 14:15, Tomi Valkeinen wrote:
> The DPI output pipeline in K3 SoCs contains the display subsystem (DSS)
> which produces the in-SoC parallel video signal, and a DPI block which
> adjusts the signal to the external MIPI DPI output.
> 
> The DSS IP has registers to configure whether the data and sync signals
> are driven on rising or falling clock edge, and on some SoCs these are
> automatically conveyed to the DPI block which needs that configuration
> to properly output the MIPI DPI signal.
> 
> However, on some SoCs the DPI block configuration has to be done
> manually, using an extra register outside the DSS, DPI0_CLK_CTRL from
> MAIN_CTRL_MMR_CFG0 block, which controls the DPI block's behavior.
> 
> Add the support to get the regmap to the register via syscon, and
> configure the bits before enabling the video output.
> 
> Original patch from Louis Chauvet <louis.chauvet at bootlin.com>
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>

Reviewed-by: Devarsh Thakkar <devarsht at ti.com>

Regards
Devarsh

> ---
>   drivers/gpu/drm/tidss/tidss_dispc.c      | 25 +++++++++++++++++++++++++
>   drivers/gpu/drm/tidss/tidss_dispc_regs.h |  4 ++++
>   2 files changed, 29 insertions(+)
> 
> diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
> index c21ac3f51720..08342a9a5e8c 100644
> --- a/drivers/gpu/drm/tidss/tidss_dispc.c
> +++ b/drivers/gpu/drm/tidss/tidss_dispc.c
> @@ -467,6 +467,8 @@ struct dispc_device {
>   	const struct dispc_features *feat;
>   
>   	struct clk *fclk;
> +	struct regmap *syscon_dpi_io_ctrl;
> +	unsigned int syscon_dpi_io_ctrl_offset;
>   
>   	bool is_enabled;
>   
> @@ -1201,6 +1203,13 @@ void dispc_vp_prepare(struct dispc_device *dispc, u32 hw_videoport,
>   				  mode->crtc_hdisplay - 1) |
>   		       FIELD_PREP(DISPC_VP_SIZE_SCREEN_VDISPLAY_MASK,
>   				  mode->crtc_vdisplay - 1));
> +
> +	if (dispc->vp_data[hw_videoport].dpi_output && dispc->syscon_dpi_io_ctrl) {
> +		regmap_write(dispc->syscon_dpi_io_ctrl,
> +			     dispc->syscon_dpi_io_ctrl_offset + 0x0,
> +			     (!ipc ? DPI0_CLK_CTRL_DATA_CLK_INVDIS : 0) |
> +			     (rf ? DPI0_CLK_CTRL_SYNC_CLK_INVDIS : 0));
> +	}
>   }
>   
>   void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport)
> @@ -2989,6 +2998,22 @@ int dispc_init(struct tidss_device *tidss)
>   
>   	dispc_init_errata(dispc);
>   
> +	dispc->syscon_dpi_io_ctrl =
> +		syscon_regmap_lookup_by_phandle_args(tidss->dev->of_node,
> +						     "ti,dpi-io-ctrl", 1,
> +						     &dispc->syscon_dpi_io_ctrl_offset);
> +
> +	if (IS_ERR(dispc->syscon_dpi_io_ctrl)) {
> +		r = PTR_ERR(dispc->syscon_dpi_io_ctrl);
> +
> +		if (r == -ENOENT) {
> +			dispc->syscon_dpi_io_ctrl = NULL;
> +		} else {
> +			return dev_err_probe(dispc->dev, r,
> +					     "failed to get 'ti,dpi-io-ctrl'\n");
> +		}
> +	}
> +
>   	dispc->fourccs = devm_kcalloc(dev, ARRAY_SIZE(dispc_color_formats),
>   				      sizeof(*dispc->fourccs), GFP_KERNEL);
>   	if (!dispc->fourccs)
> diff --git a/drivers/gpu/drm/tidss/tidss_dispc_regs.h b/drivers/gpu/drm/tidss/tidss_dispc_regs.h
> index 382027dddce8..4cdde24d8372 100644
> --- a/drivers/gpu/drm/tidss/tidss_dispc_regs.h
> +++ b/drivers/gpu/drm/tidss/tidss_dispc_regs.h
> @@ -333,4 +333,8 @@ enum oldi_mode_reg_val { SPWG_18 = 0, JEIDA_24 = 1, SPWG_24 = 2 };
>   
>   #define AM65X_OLDI_PWRDN_TX		BIT(8)
>   
> +/* Bits in the MAIN_CTRL_MMR_CFG0_DPI0_CLK_CTRL register */
> +#define DPI0_CLK_CTRL_DATA_CLK_INVDIS BIT(8)
> +#define DPI0_CLK_CTRL_SYNC_CLK_INVDIS BIT(9)
> +
>   #endif /* __TIDSS_DISPC_REGS_H */
>