[PATCH v3 2/4] dt-bindings: raspberrypi,bcm2835-firmware: Include 'reboot-mode.yaml'

[Gregor Herburger]

The Raspberry Pi firmware allows to set a reboot mode called tryboot
that allows to try booting from a different partition to allow updating
of the boot partition. Allow reboot mode properties by referencing the
reboot-mode schema. The firmware allows a 32bit value to be sent as
reboot flag so restrict the maxItems to 1.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
Signed-off-by: Gregor Herburger <gregor.herburger at linutronix.de>
---
 .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml           | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 983ea80eaec97..28c5713860468 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -133,6 +133,15 @@ properties:
     required:
       - compatible
 
+  mode-normal:
+    maxItems: 1
+
+  mode-tryboot:
+    maxItems: 1
+
+allOf:
+  - $ref: /schemas/power/reset/reboot-mode.yaml#
+
 required:
   - compatible
   - mboxes

-- 
2.47.3