[PATCH 2/2] arm64: dts: add devicetree for TQMa91xx on MBa93xxCA
Alexander Stein
alexander.stein at ew.tq-group.com
Tue Jul 7 02:14:20 PDT 2026
From: Markus Niebel <Markus.Niebel at ew.tq-group.com>
This allows using TQMa91xxCA / TQMa91xxLA SoM on MBa93xxCA
starter kit. While not having display all other interfaces
of this mainboard can be used.
Signed-off-by: Markus Niebel <Markus.Niebel at ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx91-tqma9131-mba93xxca.dts | 937 ++++++++++++++++++
2 files changed, 938 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 778aca2bef5dd..252a2d09f6a2c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -580,6 +580,7 @@ imx91-phyboard-segin-peb-av-18-dtbs += imx91-phyboard-segin.dtb imx91-phyboard-s
dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin-peb-av-18.dtb
dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba93xxca.dtb
imx91-tqma9131-mba91xxca-lvds-tm070jvhg33-dtbs := imx91-tqma9131-mba91xxca.dtb imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtbo
imx91-tqma9131-mba91xxca-rgb-cdtech-dc44-dtbs := imx91-tqma9131-mba91xxca.dtb imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts
new file mode 100644
index 0000000000000..7feaa53665497
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts
@@ -0,0 +1,937 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2026 TQ-Systems GmbH <linux at ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx91-tqma9131.dtsi"
+
+/{
+ model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa93xxCA starter kit";
+ compatible = "tq,imx91-tqma9131-mba93xxca",
+ "tq,imx91-tqma9131", "fsl,imx91";
+ chassis-type = "embedded";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ aliases {
+ eeprom0 = &eeprom0;
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &pcf85063;
+ rtc1 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial5 = &lpuart6;
+ serial7 = &lpuart8;
+ };
+
+ clk_dp: clk-dp {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ status = "disabled";
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwmfan>;
+ fan-supply = <®_pwm_fan>;
+ #cooling-cells = <2>;
+ /* typical 25 kHz -> 40.000 nsec */
+ pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+ cooling-levels = <0 32 64 128 196 240>;
+ pulses-per-revolution = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ status = "disabled";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ switch-a {
+ label = "switcha";
+ linux,code = <BTN_0>;
+ gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ switch-b {
+ label = "switchb";
+ linux,code = <BTN_1>;
+ gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_5V0_MB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_mpcie_1v5: regulator-mpcie-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V5_MPCIE";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_mpcie_3v3: regulator-mpcie-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MPCIE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_pwm_fan: regulator-pwm-fan {
+ compatible = "regulator-fixed";
+ regulator-name = "FAN_PWR";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_12v0>;
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ trips {
+ cpu_active0: trip-active0 {
+ temperature = <40000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+
+ cpu_active1: trip-active1 {
+ temperature = <48000>;
+ hysteresis = <3000>;
+ type = "active";
+ };
+
+ cpu_active2: trip-active2 {
+ temperature = <60000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&cpu_active0>;
+ cooling-device = <&fan0 1 1>;
+ };
+
+ map2 {
+ trip = <&cpu_active1>;
+ cooling-device = <&fan0 2 2>;
+ };
+
+ map3 {
+ trip = <&cpu_active2>;
+ cooling-device = <&fan0 3 3>;
+ };
+ };
+ };
+ };
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_eqos>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy_eqos: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_phy>;
+ reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ enet-phy-lane-no-swap;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_fec>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy_fec: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_phy>;
+ reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ enet-phy-lane-no-swap;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+ /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+
+ gpio-line-names =
+ /* 00 */ "SPI6_PCS0#", "", "", "",
+ /* 04 */ "", "", "", "SPI_CS#",
+ /* 08 */ "", "FAN_RPM", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "X1_11", "X1_21", "X1_17", "X1_13",
+ /* 20 */ "X1_15", "X1_9", "", "",
+ /* 24 */ "", "", "X1_7", "",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* 00 */ "SD2_CD#", "", "", "",
+ /* 04 */ "", "", "", "SD2_RST#",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ /* 00 */ "", "", "", "",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "DP_INT", "", "";
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ temperature-sensor at 1c {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1c>;
+ };
+
+ ptn5110: usb-typec at 50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "X17";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ typec-power-opmode = "default";
+ pd-disable;
+ self-powered;
+
+ port {
+ typec_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+ };
+ };
+
+ eeprom2: eeprom at 54 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <®_3v3>;
+ };
+
+ expander0: gpio at 70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pexp_irq>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+ "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+ "MPCIE_PERST#", "MPCIE_WDISABLE#",
+ "BUTTON_A#", "BUTTON_B#";
+
+ mpcie-wake-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "MPCIE_WAKE#";
+ };
+
+ /*
+ * Controls the mPCIE slot reset which is low active as
+ * reset signal. The output-low states, the signal is
+ * inactive, e.g. not in reset
+ */
+ mpcie_rst_hog: mpcie-rst-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "MPCIE_PERST#";
+ };
+
+ /*
+ * Controls the mPCIE slot WDISABLE pin which is low active
+ * as disable signal. The output-low states, the signal is
+ * inactive, e.g. not disabled
+ */
+ mpcie_wdisable_hog: mpcie-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "MPCIE_WDISABLE#";
+ };
+ };
+
+ expander1: gpio at 71 {
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+ "USB_RESET#", "",
+ "WLAN_PD#", "WLAN_W_DISABLE#",
+ "WLAN_PERST#", "12V_EN";
+
+ /*
+ * Controls the WiFi card's low-active power down pin.
+ * The output-low states, the signal is inactive,
+ * resulting in high signal at power-down pin
+ */
+ wlan-pd-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_PD#";
+ };
+
+ /*
+ * Controls the WiFi card's low-active disable pin.
+ * The output-low states, the signal is inactive,
+ * resulting in high signal at power-down pin
+ */
+ wlan-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_W_DISABLE#";
+ };
+
+ /*
+ * Controls the WiFi card's reset pin.
+ * The output-low states, the signal is inactive,
+ * resulting in high signal at power-down pin
+ */
+ wlan-perst-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_PERST#";
+ };
+ };
+
+ expander2: gpio at 72 {
+ compatible = "nxp,pca9538";
+ reg = <0x72>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+ "LCD_BLT_EN", "DP_EN",
+ "MIPI_CSI_EN", "MIPI_CSI_RST#",
+ "USER_LED1", "USER_LED2";
+ };
+};
+
+&lpi2c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c5>;
+ pinctrl-1 = <&pinctrl_lpi2c5>;
+ status = "okay";
+
+ dp_bridge: dp-bridge at f {
+ compatible = "toshiba,tc9595", "toshiba,tc358767";
+ reg = <0x0f>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tc9595>;
+ clock-names = "ref";
+ clocks = <&clk_dp>;
+ reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ toshiba,hpd-pin = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ dp_dsi_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+ };
+};
+
+&lpspi6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_lpspi6_cs>;
+ cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&lpuart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&lpuart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "okay";
+};
+
+&pcf85063 {
+ /* RTC_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcf85063>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+ /* TEMP_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_temp_sensor_som>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+/* on LVDS connector, not usable */
+&tpm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm6>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ typec_hs: endpoint {
+ remote-endpoint = <&typec_con_hs>;
+ };
+ };
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ hub_2_0: hub at 1 {
+ compatible = "usb424,2517";
+ reg = <1>;
+ reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+ vdd-supply = <®_3v3>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ disable-wp;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ /* PD | FSEL_2 | DSE X4 */
+ MX91_PAD_ENET1_MDC__ENET1_MDC 0x51e
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e
+ /* HYS | FSEL_0 | DSE no drive */
+ MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000
+ MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000
+ MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000
+ MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000
+ MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x1400
+ /* PD | FSEL_2 | DSE X4 */
+ MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
+ MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x51e
+ MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
+ MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
+ MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
+ /* PD | FSEL_3 | DSE X3 */
+ MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
+ >;
+ };
+
+ pinctrl_eqos_phy: eqosphygrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | DSE no drive */
+ MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x1000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ /* PD | FSEL_2 | DSE X4 */
+ MX91_PAD_ENET2_MDC__ENET2_MDC 0x51e
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x4000111e
+ /* HYS | FSEL_0 | DSE no drive */
+ MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x1000
+ MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x1000
+ MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x1000
+ MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x1000
+ MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x1000
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x1400
+ /* PD | FSEL_2 | DSE X4 */
+ MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x51e
+ MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x51e
+ MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x51e
+ MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x51e
+ MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x51e
+ /* PD | FSEL_3 | DSE X3 */
+ MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x58e
+ >;
+ };
+
+ pinctrl_fec_phy: fecphygrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | DSE no drive */
+ MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x1000
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ /* HYS | PU | FSEL_0 | DSE no drive */
+ MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200
+ /* PU | FSEL_3 | DSE X4 */
+ MX91_PAD_PDM_CLK__CAN1_TX 0x039e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ /* HYS | PU | FSEL_0 | DSE no drive */
+ MX91_PAD_GPIO_IO27__CAN2_RX 0x1200
+ /* PU | FSEL_3 | DSE X4 */
+ MX91_PAD_GPIO_IO25__CAN2_TX 0x039e
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_2 | DSE X4 */
+ MX91_PAD_GPIO_IO16__GPIO2_IO16 0x151e
+ MX91_PAD_GPIO_IO17__GPIO2_IO17 0x151e
+ MX91_PAD_GPIO_IO18__GPIO2_IO18 0x151e
+ MX91_PAD_GPIO_IO19__GPIO2_IO19 0x151e
+ MX91_PAD_GPIO_IO20__GPIO2_IO20 0x151e
+ MX91_PAD_GPIO_IO21__GPIO2_IO21 0x151e
+ MX91_PAD_GPIO_IO26__GPIO2_IO26 0x151e
+ >;
+ };
+
+ pinctrl_jtag: jtaggrp {
+ fsl,pins = <
+ MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e
+ MX91_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200
+ MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e
+ MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e
+ MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e
+ >;
+ };
+
+ pinctrl_lpi2c5: lpi2c5grp {
+ fsl,pins = <
+ /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ MX91_PAD_GPIO_IO22__LPI2C5_SDA 0x4000199e
+ MX91_PAD_GPIO_IO23__LPI2C5_SCL 0x4000199e
+ >;
+ };
+
+ pinctrl_lpspi6: lpspi6grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ MX91_PAD_GPIO_IO01__LPSPI6_SIN 0x1400
+ /* PD | FSEL_2 | DSE X4 */
+ MX91_PAD_GPIO_IO02__LPSPI6_SOUT 0x051e
+ MX91_PAD_GPIO_IO03__LPSPI6_SCK 0x051e
+ >;
+ };
+
+ pinctrl_lpspi6_cs: lpspi6csgrp {
+ fsl,pins = <
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_GPIO_IO00__GPIO2_IO0 0x011e
+ MX91_PAD_GPIO_IO07__GPIO2_IO7 0x011e
+ >;
+ };
+
+ pinctrl_mipi_csi: mipicsigrp {
+ fsl,pins = <
+ MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x051e /* MCLK */
+ MX91_PAD_GPIO_IO10__GPIO2_IO10 0x051e /* TRIGGER */
+ MX91_PAD_GPIO_IO11__GPIO2_IO11 0x1400 /* SYNC */
+ >;
+ };
+
+ pinctrl_pcf85063: pcf85063grp {
+ fsl,pins = <
+ MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x1000
+ >;
+ };
+
+ pinctrl_pexp_irq: pexpirqgrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_SAI1_TXC__GPIO1_IO12 0x1000
+ >;
+ };
+
+ pinctrl_pwmfan: pwmfangrp {
+ fsl,pins = <
+ /* HYS | PU | FSEL_0 | no DSE */
+ MX91_PAD_GPIO_IO09__GPIO2_IO9 0x1200
+ >;
+ };
+
+ pinctrl_tc9595: tc9595-grp {
+ fsl,pins = <
+ /* HYS | PD | FSEL_0 | no DSE */
+ MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x1400
+ >;
+ };
+
+ pinctrl_temp_sensor_som: tempsensorsomgrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | no DSE */
+ MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x1000
+ >;
+ };
+
+ pinctrl_tpm5: tpm5grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO06__TPM5_CH0 0x57e
+ >;
+ };
+
+ pinctrl_tpm6: tpm6grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO08__TPM6_CH0 0x57e
+ >;
+ };
+
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_I2C2_SCL__GPIO1_IO2 0x1000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_UART1_RXD__LPUART1_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_UART1_TXD__LPUART1_TX 0x011e
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_UART2_RXD__LPUART2_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_UART2_TXD__LPUART2_TX 0x011e
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_GPIO_IO15__LPUART3_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_GPIO_IO14__LPUART3_TX 0x011e
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_GPIO_IO05__LPUART6_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_GPIO_IO04__LPUART6_TX 0x011e
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_GPIO_IO13__LPUART8_RX 0x1000
+ /* FSEL_2 | DSE X4 */
+ MX91_PAD_GPIO_IO12__LPUART8_TX 0x011e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ /* HYS | FSEL_0 | No DSE */
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x1000
+ >;
+ };
+
+ /* enable SION for data and cmd pad due to ERR052021 */
+ pinctrl_usdhc2_hs: usdhc2hsgrp {
+ fsl,pins = <
+ /* PD | FSEL_3 | DSE X5 */
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x05be
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
+ /* HYS | PU | FSEL_3 | DSE X3 */
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ /* FSEL_2 | DSE X3 */
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e
+ >;
+ };
+
+ /* enable SION for data and cmd pad due to ERR052021 */
+ pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+ fsl,pins = <
+ /* PD | FSEL_3 | DSE X6 */
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x05fe
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
+ /* FSEL_2 | DSE X3 */
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e
+ >;
+ };
+};
--
2.54.0
More information about the linux-arm-kernel
mailing list