[PATCH v4 2/3] arm64: dts: imx93-tqma9352-mba93xxca: Add LVDS overlay

[Alexander Stein]

Add the overlay for the Tianma TM070JVHG33 LVDS display.

Reviewed-by: Frank Li <Frank.Li at nxp.com>
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  2 ++
 .../freescale/imx93-tqma9352-mba93xxca.dts    | 21 +++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index de796f2134145..bd3d35ffde975 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -641,9 +641,11 @@ imx93-tqma9352-mba91xxca-rgb-cdtech-dc44-dtbs := imx93-tqma9352-mba91xxca.dtb im
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtb
 
+imx93-tqma9352-mba93xxca-lvds-tm070jvhg33-dtbs += imx93-tqma9352-mba93xxca.dtb imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtbo
 imx93-tqma9352-mba93xxla-lvds-tm070jvhg33-dtbs += imx93-tqma9352-mba93xxla.dtb imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtbo
 imx93-tqma9352-mba93xxla-mini-ezurio-wlan-dtbs += imx93-tqma9352-mba93xxla-mini.dtb imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtbo
 
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 9108181e6592b..39a8742de1da4 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -67,6 +67,23 @@ backlight_lvds: backlight {
 		status = "disabled";
 	};
 
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -571,6 +588,10 @@ &lpuart8 {
 	status = "okay";
 };
 
+&ldb_lvds_ch0 {
+	remote-endpoint = <&panel_in_lvds0>;
+};
+
 &pcf85063 {
 	/* RTC_EVENT# from SoM is connected on mainboard */
 	pinctrl-names = "default";
-- 
2.54.0