[PATCH v2 2/3] ARM: dts: marvell: kirkwood: Correct indentation

[Krzysztof Kozlowski]

Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>

---

Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).

Changes in v2:
1. One more fix in arch/arm/boot/dts/marvell/kirkwood-b3.dts
---
 arch/arm/boot/dts/marvell/kirkwood-b3.dts                     | 4 ++--
 .../arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi            | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts          | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts          | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi                 | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
index 681343c1357a..9d5cc1689864 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
@@ -94,10 +94,10 @@ i2c at 11000 {
 
 		serial at 12000 {
 			/* Internal on test pins, 3.3v TTL
-		 	 * UART0_RX = Testpoint 65
+			 * UART0_RX = Testpoint 65
 			 * UART0_TX = Testpoint 66
 			 * See the Excito Wiki for more details.
-		 	 */
+			 */
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
index cb564c3bcdc4..a9adb777c7a0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
@@ -239,7 +239,7 @@ ethernet0-port at 0 {
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index d6b615cf6390..121d84609f20 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -83,7 +83,7 @@ &mdio {
 	status = "okay";
 
 	ethphy0: ethernet-phy at X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index 20c6290d2037..82ccc6feaf3c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -109,7 +109,7 @@ led-yellow {
 			label = "obsa6:yellow:stat";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-        };
+	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
index 2bc4b68bd723..ff08b01434bf 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -130,7 +130,7 @@ led-yellow {
 			label = "obsa7:yellow:stat";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-        };
+	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index f136059607b7..6c15e9257de3 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -57,7 +57,7 @@ &mdio {
 
 	ethphy1: ethernet-phy at 1 {
 		device_type = "ethernet-phy";
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
-- 
2.53.0