[PATCH v2 06/15] arm64: dts: freescale: imx8mn-var-som: Add MCP251xFD CAN controller

[Peng Fan]

On Mon, Jul 06, 2026 at 11:34:36AM +0200, Stefano Radaelli wrote:
>From: Stefano Radaelli <stefano.r at variscite.com>
>
>Add support for the Microchip MCP251xFD CAN-FD controller connected
>to the SPI bus on the i.MX8MN VAR-SOM.
>
>The controller uses a 40 MHz external oscillator and requires an
>interrupt line and a dedicated RX interrupt GPIO.
>
>Add the fixed clock, the MCP251xFD device node with the required
>properties, and the corresponding pinctrl configuration.
>
>Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
>---

Reviewed-by: Peng Fan <peng.fan at nxp.com>